726853

Spektrum DX18 - SPM18000 Manual

15
Zoom out
Zoom in
Previous page
1/42
Next page
15SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
Channel Input Confi guration
The Channel Input Confi guration screen enables you to assign a
transmitter channel to a different control stick or switch.
1. Select NEXT on the RX Port Assignments screen to access
the Channel Input Confi guration screen.
2. Scroll to the transmitter channel you wish to re-assign and
press the scroll wheel. The box around the current input
selection fl ashes.
3. Scroll left or right to select the desired control stick or
switch.
4. Press the scroll wheel to save the selection.
Trim Setup
Use the Trim Setup screen to change the size of the trim step
and the trim type.
Trim Step
Adjusting the trim step value determines how many “clicks” of
trim you input each time you press the trim button. Changing
the trim step value to 0 disables the trim for the channel.
To change the trim step value:
1. Scroll to the trim step channel you wish to change.
2. Select the trim step value and scroll left or right to change
the value.
3. Press the scroll wheel to save the selection.
Trim Type
The two Trim Type options are Common and F Mode.
Common trim type maintains the same trim values for all fl ight
modes.
F Mode trim type enables you to save trim values for individual
fl ight modes if you fi nd, for example, the aircraft requires aileron
trim in Flight Mode 1 but not in Flight Mode 2.
Trim Assignment
In a few instances, you can reassign a trim to a different loca-
tion.
Aircraft Model Type
Throttle
- Throttle Digital trim button (default)
- Left Analog lever
- Right Analog lever
Helicopter Model Type
Throttle and Pitch Hover Trim-Used to trim the throttle and pitch
setting for precision hovering. Note: This does not affect normal
throttle trim operation.
-Right Knob
-Left Analog Lever
-Right Analog Lever
-L Trim
-R Trim
Active Gyro and Governor Trim-Used to trim the gyro and gover-
nor settings in fl ight.
-L Trim
-R Trim.
Trim Location
Normal and Cross trim types are available. Normal trims align
with the control stick; for example, the throttle trim is next to the
throttle stick.
Cross trims reverse the position of the trims; for example, the
Throttle trim is next to the Elevator stick and vice versa.
To change the Trim Position from Normal to Crossed, select
Normal at the bottom of the Trim Setup screen and press the
scroll wheel.
IMPORTANT: Crossed trims will cross both sets of trims for both
gimbals.
X-Plus Input Confi guration
The X-Plus Input Confi guration screen enables you to assign any
X-Plus channel to any transmitter input.
1. Select NEXT on the Channel Input Confi g screen to access
the X-Plus Input Confi g screen.
2. Scroll to the X-Plus channel you wish to change.
3. Press the scroll wheel once and scroll left or right to change
the X-Plus Input for that X-Plus channel.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info