726853
18
Zoom out
Zoom in
Previous page
1/42
Next page
18 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
Trainer
The DX18 features a programmable trainer function with 4
trainer modes. The transmitter assigns the trainer function to
Switch I. The 4 trainer modes include:
Inhibit
In Inhibit, the slave transmitter must have the same program-
ming as the master transmitter (e.g., servo reversing, travel
adjust, sub-trim, trims).
Programmable
Programmable mode enables you to program the master trans-
mitter to transfer any or all individual channels when you activate
the trainer switch. This mode is ideal for beginners learning to
control individual channels while the master transmitter
maintains control of all other channels.
The slave transmitter should be in PilotLink Slave mode, if
available. It is not necessary to have model programming in the
slave transmitter.
Pilot Link Master
When Pilot Link Master is active, the slave transmitter controls
the primary stick functions (Throttle, aileron, elevator and rudder)
while the master maintains control of all other channels and
functions (including dual rates and auxillary switch positions).
PilotLink Master is ideal for complex models as the master
transmitter maintains control of all secondary functions, for
example fi lght modes, retracts, fl aps and brakes.
Slave
Use Slave mode when using the DX18 as a slave transmitter and
PilotLink is active in the master transmitter.
DX18 Trainer Operation
1. Bind the master transmitter to the model.
2. Connect the trainer cord (SPM6805) to the back of the
master transmitter.
3. Make sure the master and slave transmitter battery packs
are fully charged.
4. Make sure the slave transmitter is powered off; the slave
transmitter receives power when you connect the trainer
cord.
5. Connect the trainer cord to the slave transmitter.
6. The slave transmitter screen displays information but does
not send a signal to the model.
7. Press the trainer button on the master transmitter to transfer
model control from the master to the slave.
8. Release the trainer button and the master transmitter
regains control of the model..
Analog Switch Setup
Allows all sticks and pots to be used as a kick point to turn on
functions like mixes. To add a kick point:
1. Move the control stick, lever or knob to the desired kick point
position.
2. Scroll to the desired kick point and press the scroll wheel
once to save the selection.
To delete a kick point, scroll to the desired kick point and press
the Clear button.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info