726853
19
Zoom out
Zoom in
Previous page
1/42
Next page
19SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
System Settings
The System Settings menu consists of four screens: System Set-
tings, Extra Settings, Serial Number and Calibrate. Select NEXT
or PREV to move between screens.
User Name
The User Name fi eld displays your name in the lower right
corner of the main screen.
To Program a User Name
1. Scroll to User Name and press the scroll wheel. The User
Name screen appears.
2. Scroll to the desired character position and press the scroll
wheel. Scroll left or right to change the character and press
the scroll wheel to save the selection. The User Name can
contain a maximum of 20 characters, including spaces.
3. Press the Back button to save the User Name and return to
the System Settings screen.
Contrast
To adjust the screen contrast:
1. Scroll to Contrast and press the scroll wheel.
2. Scroll left or right to adjust the contrast value. Lower num-
bers lighten the contrast, higher numbers darken it.
3. Press the scroll wheel once to save the selection.
Backlight
The Backlight fi eld adjusts the backlight appearance time and
brightness. You have the option to turn the backlight off for
models you fl y during the day and turn the backlight on for night
ying models.
The backlight time options are:
Off: Appears for a short time when you power on the transmit-
ter.
On: The backlight is always on.
Set Time: The backlight is on for 3, 10, 20, 30, 45 or 60 sec-
onds before automatically turning off. Press the scroll wheel
once to turn the backlight on.
The backlight percentage adjusts the backlight intensity and it
is adjustable in 10% increments from 10% (darker) to 100%
(brighter).
Mode
You can change the control stick mode from
Mode 2 to Mode 4 or Mode 1 to Mode 3.
Mode changes that require movement of complete gimbal
assemblies must be performed by a Horizon Hobby service
center.
To change the gimbal stick mode:
1. Scroll to Mode and press the scroll wheel.
2. Scroll left or right to change the gimbal stick mode. Press
the scroll wheel to save the selection.
3. Select NEXT in the lower left corner until the Calibration
screen appears.
4. Move all transmitter controls to the center position and
complete the calibration process before exiting the System
Settings menu. See “Calibrating Your Transmitter” for more
information.
Battery Alarm
Battery Alarm enables you to change the transmitter battery type
and the alarm voltage limit. The alarm activates when the battery
reaches the low voltage limit.
To change the battery alarm:
1. Scroll to the battery type and press the scroll wheel once to
change the type to LiPo or NiMH.
CAUTION: Never select NiMH when a LiPo battery is
installed in the transmitter. Doing so may over-discharge
the LiPo battery and damage the battery, transmitter or both.
2. Scroll to the battery voltage and press the scroll wheel. Turn
the scroll wheel left or right to change the voltage level.
Press the scroll wheel again to save the selection.
CAUTION: Never adjust the low voltage limit for the LiPo
battery pack below 6.4V. Doing so could over-discharge
the battery pack and damage both battery pack and transmitter.
Selecting a Language
In the Systems Settings screen, rotate the roller to highlight
Language then press the roller to select the Language function.
Rotate the roller to select the desired Language. When the
desired Language is selected, press the roller to accept that
Language. Names you input will not be affected by language
change.
Selecting a Region (EU Version)
The Region fi eld enables you to change the region of operation
and power output for transmitters sold in the European Union.
Region options include:
EU-328 FR-328
If you are using the transmitter in France, you must select
FR-328 to comply with power output regulations in France.
To change the region:
1. Scroll to Region and press the scroll wheel.
2. Scroll left or right to change the region and press the scroll
wheel once to save the selection.
Transmitters sold outside of Europe do not have the option to
change the region from US-247.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info