726853

Spektrum DX18 - SPM18000 Manual

21
Zoom out
Zoom in
Previous page
1/42
Next page
21SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
Calibrate
The Calibration screen stores the potentiometer endpoints for all
proportional controls. It is mandatory to complete the calibration
after changing the stick mode selection.
Calibrating the Transmitter
1. Carefully move the gimbal sticks in a + shape moving from
left to right, then up and down. Press gently on the gimbals
at the stops to achieve an accurate calibration. Return both
gimbal sticks to the center position.
2. Move the Left and Right Side Levers to the top and bottom
positions, then move the side levers to the center position.
IMPORTANT: Only move one side lever at a time during
calibration.
3. Move the Knob to the full clockwise and counter-clockwise
positions, then return the Knob to the center position.
4. Select SAVE to store the calibration.
Transfer SD Card
Import Model
To import an individual model fi le from the SD Card:
1. Save the model fi le to the SD Card.
2. Select the Model List location where you wish to import the
new model fi le.
3. In the SD Card menu, scroll to Select Option and press the
scroll button once.
4. Scroll to Import Model and press the scroll button again to
save the selection. The Select File screen appears.
5. Select the model fi le you wish to import. The Overwrite
screen appears.
IMPORTANT: When you select Import, the transmitter
leaves the System Setup List.
6. Select Import to confi rm overwriting the current model fi le.
The transmitter activates the new model fi le and the Main
Screen appears.
NOTICE: A Prefl ight Checklist may appear prior to the Main
Screen if the checklist was active during the model fi le export.
Select MAIN to exit the Prefl ight Checklist.
See “Prefl ight Setup” for more information.
Import All Models
To import all models from the SD Card, select Import All Models,
and then confi rm by selecting IMPORT.
NOTICE: This function overwrites the model memories. Ensure
that the models currently in your transmitter are saved on an
SD card separate from the transmitter before performing this
function.
You can import a model to any location you want. If you prefer to
use Import All, you can use your PC to rename the SPM fi le. The
fi rst two digits (01 to 50) are the destination model number. Your
SD card can only contain 50 models. Save fi les to folders on the
card then remove from the card all unused models. Files are
selected by their position in the directory table.
Export Model
You can use the Export Model option to export a single model
fi le to the SD Card.
1. Make sure the active model fi le is the one you wish to
Export.
2. Scroll to Select Option and press the scroll button once.
3. Scroll to Export Model and press the scroll button again to
save the selection. The Export to SD screen appears. The
fi rst two characters of the fi le name correspond to the Model
List number (01, for example).
4. (Optional) If you wish to rename the model fi le before export-
ing it to the SD Card:
a. Scroll to “Save to:” and press the scroll wheel. The File
Name screen appears.
b. Assign a new fi le name. The fi le name can contain up to
25 characters including the .SPM fi le extension.
c. When you are done assigning the new fi le name, press
the Back button to return to the Export to SD screen.
5. Select Export to save the fi le to the SD Card. When the
export is complete, the transmitter returns to the SD Card
Menu screen.
Export All Models
To export all models to the SD Card:
1. Select Export All Models in the SD Card Menu options. The
Export All Models screen appears.
IMPORTANT: Export All Models will overwrite any model
fi les that are:
a. Already saved on the SD Card and
b. You are exporting a model fi le with the same
name. Always save model fi les to a different SD
Card if you are not sure.
2. Select Export to overwrite fi les on the SD Card or Cancel to
return to the SD Card Menu.
Update AirWare
IMPORTANT: The orange LED Spektrum bars fl ash and a status
bar appears on the screen when AirWare updates are installing.
Never power off the transmitter when AirWare updates are
installing. Doing so may damage the system fi les.
Before installing any AirWare fi les, always Export All Models to
an SD Card separate from the SD Card containing the AirWare
update. The AirWare update may erase all model fi les.
For more information on AirWare updates, visit
Community.SpektrumRC.com
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info