810451

Spartherm Mini H2O Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
GB
GB 37
• At a combustion time of approx. 60 minutes the total capacity of the
fireplace insert that is output is approx. 10 kW.„1.3 Technical data“
5. CLEANING AND MAINTENANCE
For cleaning, also comply with the information in the operating instructions
of the fireplace inserts. The information in these installation and operating
instructions refer only to the cleaning of the heat exchanger of the H2O
fireplace insert.
Bear in mind that through cleaning, contamination of the setup room
and the clothing worn can occur. We recommend that you protect the
area around the fireplace insert opening against contamination with
foil or with a cloth.
5.1 CLEANING THE HEAT EXCHANGER
Cleaning the heat exchangers is absolutely necessary. The heat exchanger
can only function at full efficiency if it is regularly and properly cleaned and
serviced. Cleaning must always be executed in cooled-down status!
Because the heat exchanger directly cools down the flue gases of the H2O
fireplace insert, and this unavoidably results in deposits on the surfaces of
the heat exchanger, these surfaces must be cleaned with the provided brush
on a regular basis. Frequency of cleaning depends on several factors (use
intensity, duration of burning, fuel, chimney draught, etc.) and a general
statement concerning frequency cannot be made. Initially we recommend a
cleaning after approximately 5 burn days. Then if contamination cannot be
detected, the cleaning can be executed approximately every 20 burn days.
The cleaning intervals must be adapted to the local conditions. With the use
of dry firewood and compliance with our recommendations, the cleaning
intervals can be significantly extended. After the heating season ends,
thorough cleaning of all components is necessary.
The heat exchanger is always cleaned through the combustion chamber
of the fireplace insert. For this the fireplace door must be opened and the
flame deflector plate (deflector plate) must be taken out of the combus-
tion chamber. Next, the thermally activated flue gas damper (if present)
is removed through the combustion chamber (see Fig. 8a-b). To do this,
the damper is tilted slightly by the handle and taken out in a downwards
direction. The thermal flue gas damper must only be cleaned of residues
with a cloth or a brush In this process pressure must not be exerted on the
four wings of the flue gas damper. This could impair the function.
Example of wood placement
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Mini H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Mini H2O in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Mini H2O

Spartherm Mini H2O User Manual - German - 44 pages

Spartherm Mini H2O User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info