810451

Spartherm Mini H2O Manual

36
Zoom out
Zoom in
Previous page
1/44
Next page
GB 36
At continuous operation of the H2O fireplace insert low flue gas tem-
peratures can result in chimney damage if the chimney systems are
not suitable. For this reason, we recommend that an hourly wood feed
quantity of 5-6 kg during a burn day not be underranged.
• The thermally activated flue gas damper integrated in the heat exchanger of
the the H2O fireplace insert Mini Z1 H2O-series, Nova E H2O, Varia Ah H2O and
Varia AFDh H2O automatically controls the function. At a sufficiently high flue
gas temperature (approx. 150°C), the flue gas damper closes automatically.
Thus the flow of flue gas is diverted through the heat exchanger. If the flue gas
temperature drops under this temperature again, the flue gas damper opens.
For better efficacy of the heat exchanger, the H2O fireplace insert should be fired
as uniformly as possible, and frequent burn-down to the basic embers should
be avoided in order to obtain heat dissipation of the heat exchanger that is as
uniform as possible and to avoid low chimney temperatures.
• Double glazing (IR reflective surface): Through application of oxidic coat-
ings on the glass surface, infrared spectral components from the com-
bustion chamber are reflected to a great extent. These coatings generate
the interference colours (similar to a rainbow), the so-called IR reflective
surface. Through this colouration, the quality characteristic of the "IR
reflective surface" is visible, i.e. recognisable. This colouration cannot
be removed.
• To operate the fireplace insert with nominal heat output, the following
prerequisites are necessary.
• The fireplace insert must be heated up (wood has already been supplied
2-3 times).
• Combustion must be operated with a closed door.
• Chimney draught: 12-14 Pa
• Wood: Dry beech wood; (moisture < 18%)
• Wood feed quantity: „1.3 Technical data“
• Air setting: Approximately middle position, may need to be slightly
adapted depending on local conditions (see example). During the com-
bustion phase the air lever can be opened for several minutes.
instructions concerning the general operation of the H2O fireplace insert
are provided in the operating instructions for Spartherm fireplace inserts.
The H2O fireplace inserts/heating systems must be filled and vented before
firing. In this process the heating system pressure must be checked (~1.5
bar). After commissioning venting must be executed daily. As soon as cold
air no longer accumulates the interval can be extended.
The heating system and the stove/fireplace insert must be filled with water
treated in accordance with VDI 2035 Sheet 1.
4. OPERATION
For operation, also comply with the operating instructions in the manual
for our fireplace inserts. The information in these installation and operating
instructions refers to special operation of a fireplace insert with integrated
water heat exchanger.
• The combustion chamber door must be self-closing for multiple-con-
nection flue gas systems. The door may only be opened to put on more
firewood or for cleaning when in a cool state. Manipulation of the
closing device is prohibited. If a single-connection system is present,
the combustion chamber door must not be self-closing! However the
combustion chamber doors must always be closed during combustion!
IMPORTANT: The provided heat-resistant glove serves only as ther-
mal protection when activating the operating handle and the cold
hand. The glove is not fire-proof.
• The distance between flammable parts/furniture and the view pane must
be at least 80 cm!
• The fireplace insert is designed for the burning of dry, untreated wood
logs with adhering bark and wood briquettes. Do not use other fuels.
• Operation in the partial load range results in low flue gas temperatures.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Mini H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Mini H2O in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Mini H2O

Spartherm Mini H2O User Manual - German - 44 pages

Spartherm Mini H2O User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info