810451
34
Zoom out
Zoom in
Previous page
1/44
Next page
GB 34
Changing the ash drawer:
1. Dismount the blind cover with seal. For this, 6 screws must be unscrewed
(Fig. 6b).
2. Take out the ash drawer (Fig. 6a) and insert it on the opposite side.
3. The blind cover with seal must be mounted on the opposite side with 6
screws (Fig. 6b).
Ash pan:
Please order the items, blind cover, seal, and ash pan large.
1. Take out the ash drawer (Fig. 6a).
2. Mount the blind cover with seal and 6 screws on the appropriate side
(Fig. 6b).
3. Insert the ash pan in the combustion chamber under the grate.
2.14 DOOR STOP/HEIGHT LIMITATION ONLY FOR THE
VARIA 2Lh/2Rh H2O
The elevating door is equipped with a variable door stop only for the Varia
2Lh/2Rh H2O. This is factory set to the middle position, i.e. the opening height
is set so that it is reduced by 50 mm. If the opening height should be further
reduced (reduction of the opening height by 100 mm) or increased (maximum
opening), the stops on both sides must be converted. After completion of the
heating chamber, these stops can be reached through the gap between glass
and door hood. The following work steps must be executed for this:
Shifting the door stop to maximum opening
1. Close the elevating door so that the fastening screws can be reached
(see Fig. 7d).
2. Unscrew the M5x10 threaded screws an both sides of the device with a
4 mm Allen wrench (ball head). Fig. 7a: View from below between glass
and door hood
3. Pull off the door stops in the direction of the red arrow. It is possible that
these may have seized slightly and must be "levered off" from below
with a slot-head screwdriver.
4. The door stops will no longer be required, however they should be kept
on hand.
Fig. 7a
Ash drawer
Blind cover
Fig. 6a
Fig. 6b
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Mini H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Mini H2O in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Mini H2O

Spartherm Mini H2O User Manual - German - 44 pages

Spartherm Mini H2O User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info