810451
33
Zoom out
Zoom in
Previous page
1/44
Next page
GB
GB 33
2.11 CHIMNEY CONNECTION / CONNECTING PIECES
The H2O is connected to the chimney with the connecting pieces made
of steel sheet at least 2 mm thick. These connecting pieces must satisfy
the requirements specified in DIN 1298 and DIN EN 1856-2, and must be
connected to the chimney / flue gas system in accordance with the require-
ments specified in DIN 18160 or the country-specific regulations. It must
be ensured that the flue gas pipe is installed in the shortest possible route
upwards towards the chimney. The number of bends in the flue gas pipe
should be kept to a minimum. In addition, the flue gas pipe must be con-
nected to the chimney with a bricked-in wall lining and sealed. The connect-
ing pieces must be sealed if necessary! If the flue gas pipe is routed through
components with flammable building materials, the flue gas pipe must be
insulated as specified in the regulations. The connecting line must always
be mounted in such a manner that it is possible to clean the connecting line
at any time. This must be ensured through a sufficient number of cleaning
openings. A gauge connection must be installed so that it is accessible for
determination of the negative chimney pressure in the connecting line.
In H2O RLU fuel cells observe the leaflet for space independent fuel
cells!
2.12 TURBULATORS FOR THE VARIA 1V/1Vh H2O XXL /
FD(h) H2O
Please note that turbulators are only installed in the flue gas ducts for the
device variant Varia 1V/1Vh H2O XXL. Removal occurs through the combus-
tion chamber:
1. Take out the deflector plate
2. Turn the turbulator diagonally (Fig. 5a) and
3. Pull it downward into the combustion chamber (Fig. 5b)
Installation occurs in the opposite sequence.
Note:
If there are draught problems, the turbulators in the flue gas ducts can be
removed. However, through this measure, a lower capacity on the water-side
of approx. 1-4% is possible.
2.13 CONVERSION – ASH DRAWER FOR THE VARIA
FD/FDh/1VX/1VXh H2O
The Varia FD/FDh/1VX/1VXh H2O is factory equipped with an ash drawer
Fig. 6a) on the front or rear. It is possible to attach the ash drawer on the
opposite side; if the necessary opening/flap is not desired in the custom-
er-provided cladding, the conventional ash pan in the combustion chamber
can be used. The opening of the ash drawer in this case must be sealed
with a blind cover. The following conversion measures are necessary for
both variants.
Fig. 5a Fig. 5b
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Mini H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Mini H2O in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Mini H2O

Spartherm Mini H2O User Manual - German - 44 pages

Spartherm Mini H2O User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info