810451
39
Zoom out
Zoom in
Previous page
1/44
Next page
GB
GB 39
5.4 MAINTENANCE OF THE HEAT EXCHANGER
At regular intervals during the heating season, the water pressure of the
heating system must be checked. The H2O fireplace insert must only be
operated in a completely filled and ventilated state.
The technical heating inspection and checking of all safety devices (thermal
discharge safety device, safety valve, etc.) and of the other components,
such as the pump thermostat, is required yearly before the heating sea-
son. The instructions in the installation and operating manuals provided
by the respective manufacturers of the components must be complied
with. This check must only be executed by a specialised company that can
ensure the functionality of the individual components. We recommend that
you conclude a maintenance contract with your specialised company.
The yearly safety inspection (e.g. function check of the thermal
discharge safety device, pump thermostat, safety valve, expansion
vessel, etc.) should occur before the heating season. The executed yearly
safety inspections must be documented by your specialised company in
the commissioning protocol! If there is a complaint, documentation of the
maintenance tasks that have been executed must be submitted to service
personnel.
6. GUIDE
Note: The fireplace must not be used as a waste incinerator! Furthermore,
remember that the device is designed for temporary burning only. Continu-
ous burning cannot be achieved even through withdrawal of the combustion
air and is not permitted!
You can solve the following problems on your own:
Problem description Solution
Thermal discharge safety device
trips constantly (constant water
outflow through the discharge).
The water heat exchanger cannot
dissipate heat to the heating
system.
The buffer tank is "full". Withdraw heat from the tank.
Check function and settings of the pump thermostat and
the return flow boost.
Set the pump one level higher (higher flow rate).
Circulation pump does not run. Is the pump or power
connection defective?
Return flow temperature too high, < 70°C
Check whether the shut-off elements are closed
Is sufficient heating water available?
Thermal discharge safety device
drips.
Contamination of the discharge safety device.
Flush the thermal discharge safety device by activating the
red button on the fitting.
Check the seat of the connection seals and the piston
(see the manual provided by the manufacturer).
If necessary, integrate filter in the system upstream of the
discharge safety device (pay attention to the minimum flow
rate!)
Gurgling noises, boiling noises in
the water-bearing parts of the H2O
fireplace insert. (Air in the system)
Check system pressure.
Ventilate system via the vent. For newly filled or topped
up systems it takes some time for all the air to exit. Often
ventilating once does not suffice.
Bypassklappe
Fig. 9
The steel front is not
shown in Fig. 9.
Bypass
damper
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Mini H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Mini H2O in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Mini H2O

Spartherm Mini H2O User Manual - German - 44 pages

Spartherm Mini H2O User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info