Manual Silvercrest IAN 326488SKMM 1000 A2 (page 33 of 145) (English, German, Dutch, French, Polish, Swedish)

751812

Zoom out

Zoom in

1/145

7.5 Switching on and off and

adjusting the speed

Use the dial12 to switch the device on and off and select

the speed setting:

NOTE: when selecting the speed setting, consult the rec-

ommendation in the tables.

8. Using the blade assembly

DANGER! Risk of injury!

~The blades of the blade assembly8 are very sharp.

Do not touch them. When you are not using the blade

assembly, push the blade guard on to the blades.

•Removing the blade

guard:

Pull the blade guard in the

middle slightly away from the

blade assembly and remove

this by pulling upwards.

•Attaching the blade

guard:

Place the blade assembly8

into the blade guard from the

top. Make sure that both

blades are completely pro-

tected.

Application area:

The blade assembly8 is suitable for chopping onions,

herbs, vegetables, fruit, parmesan and meat. You can also

use the blade assembly to knead dough.

WARNING! Risk of material damage!

~Do not use the device to chop particularly hard food

such as bones or nutmegs.

~The blade assembly is not suitable for grain, ice, nuts

or similar types of hard food.

Processing table for chopping:

Processing table for kneading:

WARNING! Risk of material damage!

~Do not operate the device continuously with the blade

assembly8 in place for more than 3 minutes. After

this, the device must remain switched off until it has

cooled down to room temperature.

~The device is unsuitable for heavy dough (e.g. full-

grain bread dough) or large amounts of dough. It is

possible to process sizeable amounts of dough in por-

tions.

Required accessories:

- Working container9

- Blade assembly8

-Lid3 with food pushers1, 1, 2

And this is how it works:

(For assembly see Figure M)

1. Position the working container9 on the base unit13.

Turn the working container slightly in a clockwise di-

rection until it is heard to lock into place.

2. Place the blade assembly8 into the working contain-

er9.

3. Fill the ingredients into the working container9. Fur-

ther ingredients can be added at a later time through

the food chute.

4. Place the lid3 with the food pushers1, 1, 2 onto the

working container9. Turn the lid slightly in a clock-

wise direction until it is heard to lock into place.

5. Connect the mains plug10 to a wall socket.

6. Use the dial12 to select the desired speed setting.

Switch

position Function

Pulse function:

- Hold the dial12 in the P position to

switch on the device.

- Release the dial12 to switch off the

device.

- Enables working with several brief

pulses in a row – recommended e.g.

for herbs and onions

0Turned off

1Speed setting 1 (normal)

2Speed setting 2 (high)

Ingredients Preparation max.

quantity Processing

time

Switch

Meat

cutting into

cubes,

approx.

2x2cm

500 g approx.

30 - 60 sec. 2 / P

Onions

quartered,

without peel

500 g approx.

30 - 60 sec. P

Garlic

without peel

500 g approx.

30 - 60 sec. P

Carrots

cutting into

pieces,

approx.

2x2cm

500 g approx.

30 - 60 sec. 2 / P

Ingredients max. quantity Processing time

Switch

Yeast dough max. 500 g of flour approx. 3 min. 1

__326488_Kuechenmaschine Multi_B8.book Seite 31 Dienstag, 6. August 2019 10:40 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326488SKMM 1000 A2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 7,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 326488SKMM 1000 A2 Manual

Product: