751812
32
Zoom out
Zoom in
Previous page
1/145
Next page
30 GB
7.2 Adding ingredients
When filling liquid ingredients into the working con-
tainer9, note that the maximum filling level is
1250 ml.
No liquids may be processed in the mini crusher15 +
16. The ingredients may be filled up only to the MAX
mark.
Note the information in the processing tables on the
maximum amounts of ingredients.
Insert the following accessories before putting the in-
gredients into the working container9:
- Blade assembly8
-Axle17 + mixer assembly19
-Axle17 + whisking disc7
For topping up with the lid3 closed, the device is pro-
vided with a food chute with a 2-in-1 food pusher. De-
pending on amount and size of the ingredients,
remove the food pusher1. This way, there are two
food chute sizes available to you.
When working with the discs 5, 4 always use the mini
food pusher1 in order to achieve the best result.
When working with the French fries disc6, always use
the maxi food pusher 2 in order to achieve the best re-
sult.
NOTE: these instructions always describe only the use of
a food pusher which is frequently suitable. Match the selec-
tion of the food pusher to the food.
You can remove the mini food pusher1 while the de-
vice is running.
If you use the large food chute (with the maxi food
pusher2), the ingredients may only be filled in up to
the MAX mark.
The mini food pusher1 has a small hole in the bottom,
through which liquids can slowly drip into the working
container (e.g. for dripping in oil slowly when prepar-
ing mayonnaise).
7.3 Power supply
DANGER! Risk of injury!
~Do not insert the mains plug10 into a wall socket until
the food processor has been completely assembled for
the intended purpose.
Insert the mains plug10 into a wall socket with ground
contacts which corresponds to the technical data on the rat-
ing plate. The wall socket must still be easily accessible af-
ter connection.
7.4 Safety functions
In order to minimise the risk of injury, the food processor
can only be started if certain accessories have been assem-
bled correctly.
DANGER! Risk of injury!
~Never bypass the safety functions!
The principle: Marking z + /
Wherever you see the lock symbols and a dot, the same
principle applies.
1. Placing the upper accessory in
position: place the upper accessory
with the z mark in position on the
open lock symbol .
2. Turning clockwise:
Turn the upper accessory clockwise
until it locks into place.
3. Correctly assembled:
When the accessories have been cor-
rectly assembled, the z mark points
to the closed lock symbol .
In order to remove this, turn the upper accessory anti-
clockwise until the z mark points to the open lock
symbol . You can then lift off the accessory.
The individual accessories
Figure B: the working container9 must engage with
the base unit13 by means of a small turn in the clock-
wise direction.
Figure C: the lid3 must engage with the working
container9 by means of a small turn in the clockwise
direction.
Figure K: for the citrus press, the lid3 is not re-
quired. Instead, the screen18 must engage with the
working container9 by means of a small turn in the
clockwise direction.
Figure F: the mini crusher15 + 16 is placed directly
on the base unit13 without the working container9.
This must be assembled correctly and engage with the
base unit by means of a small turn in the clockwise di-
rection.
The maxi food pusher
Figure D: when the lid3 has been put in place, the
maxi food pusher 2 must be inserted into the food
chute. It can be pulled up all the way to the MAX
mark without interrupting operation. When it is pushed
down, this safety function causes a resistance.
GB_326488_Kuechenmaschine Multi.fm Seite 30 Donnerstag, 19. September 2019 10:51 10
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326488SKMM 1000 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326488SKMM 1000 A2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info