751812

Silvercrest IAN 326488SKMM 1000 A2 Manual

35
Zoom out
Zoom in
Previous page
1/145
Next page
33
GB
to prepare mayonnaise) you can use the mini food
pusher1 with a small opening in the bottom.
5. Place the lid3 with the food pushers1, 2 onto the
working container9. Turn the lid slightly in a clock-
wise direction until it is heard to lock into place.
6. Connect the mains plug10 to a wall socket.
7. Use the dial12 to select the desired speed setting.
8. When the process is completed, switch the dial12 to
0 and pull out the mains plug10.
9. Turn the lid3 slightly in an anticlockwise direction
and remove it.
10. Turn the working container9 slightly in an anticlock-
wise direction and remove it.
11. Remove the axle17 together with the whisking
disc7 upwards and remove the prepared food from
the working container9.
12. Clean all of the accessories that have been used im-
mediately if possible.
11. Using the French fries disc
Application area:
The French fries disc6 is suitable for cutting French fries
from raw potatoes.
WARNING! Risk of material damage!
~Do not apply too much pressure to the French fries
disc6. Apply an even pressure so that the motor does
not become blocked.
NOTE: for best results, place large potatoes (if necessary
in halves) crossways in the large food chute and press
down with the maxi food pusher2.
Processing table:
WARNING! Risk of material damage!
~Do not operate the device continuously with the French
fries disc6 in place for more than 2 minutes. After
this, the device must remain switched off until it has
cooled down to room temperature.
Required accessories:
- Working container9
-Axle17
- French fries disc6
-Lid3 with food pushers1, 2
And this is how it works:
(For assembly see Figure J)
1. Position the working container9 on the base unit13.
Turn the working container slightly in a clockwise di-
rection until it is heard to lock into place.
2. Place the axle17 into the working container9.
3. Place the French fries disc6 on the axle so that the
French fries blades are positioned upwards.
4. Place the lid3 with the food pushers1, 2 onto the
working container9. Turn the lid slightly in a clock-
wise direction until it is heard to lock into place.
5. Connect the mains plug10 to a wall socket.
6. Remove the maxi food pusher2 and fill the pre-
pared, raw potatoes into the food chute no higher
than the MAX mark.
7. Reinsert the maxi food pusher2.
8. Switch the dial12 to the 2 position and press the po-
tatoes downwards with the maxi food pusher2 with
a light, even pressure.
9. Stop (dial12 in the position 0) before all of the pota-
to pieces in the food chute are processed so that you
can fill in more potatoes.
10. Process all potatoes portion by portion. Empty the
working container9 from time to time if it is filled up
to the MAX mark.
11. When the process is completed, switch the dial12 to
0 and pull out the mains plug10.
12. Turn the lid3 slightly in an anticlockwise direction
and remove it.
13. Turn the working container9 slightly in an anticlock-
wise direction and remove it.
14. Hold the axle17 at the top end and lift it out togeth-
er with the French fries disc6.
15. Remove the cut French fries from the working contain-
er9.
16. Clean all of the accessories that have been used im-
mediately if possible.
Ingredients max. quantity max.
processing time
Switch
Potatoes 500 g approx. 2 min. 2
__326488_Kuechenmaschine Multi_B8.book Seite 33 Dienstag, 6. August 2019 10:40 10
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326488SKMM 1000 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326488SKMM 1000 A2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info