751812

Silvercrest IAN 326488SKMM 1000 A2 Manual

36
Zoom out
Zoom in
Previous page
1/145
Next page
34 GB
12. Using the grater and cutting
disc
Application area:
The coarse grater and cutting disc4 and the fine grater
and cutting disc5 are suitable for grating and cutting slic-
es of vegetables, fruit, potatoes and cheese. Both sides of
these discs can be used. On the one side for grating and
on the other side for cutting slices.
Both discs are marked with a pattern for orientation.
WARNING! Risk of material damage!
~Do not exert too much pressure on the grater or cutting
disc5/4. Apply an even pressure so that the motor
does not become blocked.
Processing table - cutting:
Processing table - grating:
WARNING! Risk of material damage!
~Do not operate the device continuously with the grater
and cutting disc5 or 4 in place for more than
2 minutes. After this, the device must remain switched
off until it has cooled down to room temperature.
Required accessories:
- Working container9
-Axle17
- Fine grater and cutting disc5 or
coarse grater and cutting disc4
-Lid3 with food pushers1, 2
And this is how it works:
(For assembly see Figure J)
1. Position the working container9 on the base unit13.
Turn the working container slightly in a clockwise di-
rection until it is heard to lock into place.
2. Place the axle17 into the working container9.
3. Position the grater and cutting disc5 or4 on the axle
in such a way that the tool with which you want to
work is positioned on top.
4. Place the lid3 with the food pushers1, 2 onto the
working container9. Turn the lid slightly in a clock-
wise direction until it is heard to lock into place.
5. Connect the mains plug10 to a wall socket.
6. Remove the midi food pusher1 and fill the prepared
ingredients into the food chute.
7. Turn the dial12 to position 1 (grating) or 2 (cutting)
and use the midi food pusher1 to press the ingredi-
ents down with a light, even pressure. Ingredients
with a long shape, such as carrots, courgettes, cu-
cumbers can be pressed downward without a food
pusher if they protrude from the top of the food chute.
8. Stop (dial12 in the position 0) before all of the in-
gredients in the food chute are processed so that you
can fill in more ingredients.
9. Process all ingredients portion by portion. Empty the
working container9 from time to time if it is filled up
to the MAX mark.
10. When the process is completed, switch the dial12 to
0 and pull out the mains plug10.
11. Turn the lid3 slightly in an anticlockwise direction
and remove it.
12. Turn the working container9 slightly in an anticlock-
wise direction and remove it.
13. Hold the axle17 at the top end and lift it out with the
grater and cutting disc5 or4.
14. Remove the processed ingredients from the working
container9.
15. Clean all of the accessories that have been used im-
mediately if possible.
Pattern Grater and cutting disc
Coarse grater and cutting disc4
Fine grater and cutting disc5
Ingredients max. quantity max.
processing time
Switch
Carrots 500 g approx. 2 min. 2
Courgettes 500 g approx. 2 min. 2
Leeks 500 g approx. 2 min. 2
Beetroots
(peeled) 500 g approx. 2 min. 2
Ingredients max. quantity max.
processing time
Switch
Carrots 500 g approx. 2 min. 1
Cutting Grating
__326488_Kuechenmaschine Multi_B8.book Seite 34 Dienstag, 6. August 2019 10:40 10
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326488SKMM 1000 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326488SKMM 1000 A2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info