693647

Siemens Climatix 2 Manual

54
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
54
-
Example: - the boiler temperature is 50°C
- the Differential flue gas - water parameter is 6K
- the Flue gas differential parameter is 5K
Ignition is activated if the flue gas temperature is below 56°C (50+6=56).
Ignition is deactivated if the flue gas temperature is above 61°C (50+6+5=61).
The Boost flue gas temperature parameter determines by how many degrees Celsius the flue
gas temperature must rise during the mode “Ignition” so that the ignition process can be
considered successful.
The parameter setting is ranging from 5 – 30 °C; the default value is 15 °C.
The instructions for changing this parameter can be found in chapter 4.
The Fan during ignition parameter determines the fan speed during the mode “Ignition”.
The parameter setting is ranging from 20 – 100 %; the default value is 60 %.
The instructions for changing this parameter can be found in chapter 4.
The Fan delay time parameter determines the delay time of putting the fan into operation
compared to the ignition aggregate during the mode “Ignition”.
The parameter setting is ranging from 0 – 120 sec; the default value is 30 sec.
The instructions for changing this parameter can be found in chapter 4.
The Ignition repetition parameter determines how many cycles (ignition attempts) the boiler
performs before it reports an ignition failure.
The parameter setting is ranging from 1 – 10 cycles; the default value is 3 cycles.
The instructions for changing this parameter can be found in chapter 4.
7.6. FLUE GAS OUTLET
It is an additional attachment of the boiler which increases the chimney draught. According to the
type and size of the boiler, the flue gas outlet can be included in basic or optional equipment of the
boiler.
After clicking on the line Flue gas outlet it is possible to enter the menu concerning the setting of
flue gas outlet parameters:
The Flue gas limitation parameter defines the flue gas temperature at which the control unit starts
to reduce the actual power of the boiler so that this certain temperature value will not be exceeded.
This value represents a temperature limit above which the effectiveness of the boiler would start to
decrease unacceptably and the risk of heat damage of internal (non-metallic) parts of the boiler
would occur.
The setting of the Flue gas limitation parameter is ranging from 200 – 300 °C; the default value is
300 °C.
The instructions for setting the temperature can be found in chapter 4.
The function Operating mode (Ignition/ Ignition+Operation) defines the operating mode of the flue
gas outlet.
If Ignition is selected, the flue gas outlet is in operation only during the mode “Ignition”. When this
mode ends, the flue gas outlet turns off after its overrun time.
If Ignition+Operation is selected, the flue gas outlet is in operation during the mode “Ignition” as
well as during the boiler mode “Operation”. The flue gas outlet and the combustion air fan work
… 54 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info