699548

Satel MICRA Manual

22
Zoom out
Zoom in
Previous page
1/52
Next page
20 MICRA SATEL
Blocking – option available for the communication device mode. If enabled, the zone will
function as a blocking zone, i.e. its violation will result in blocking other zones of the
module. Only one module zone from among the wired and wireless ones can perform
the function of blocking zone.
Blocked – option available for the communication device mode. If enabled, the zone will
be blocked upon violation of a blocking zone or after receiving by the module of
a suitable control command in SMS message (content of the command being defined in
the "Bypass" field).
Zone type – parameter available for the alarm device mode. One of the zone types
described in section “Wired zones” can be selected. You can make your selection in the
dropdown menu which will be displayed after a right-click of your mouse, or by entering
the digit corresponding to the zone type.
Output 1 / 2 – fields available for the communication device mode. They allow you to
define, if and how the zone will control the output. Click on the field twice to display
successively:
– blank field – zone does not control the output,
– ON – violation of the zone will activate the output,
– ON for a time – violation of the zone will activate the output for a defined time (cut-
off time must be defined for the output),
– OFF – violation of the zone will deactivate the output.
Presence check – select the field (the field is selected, when the “x” symbol is shown in
it), if the module is to control presence of the detectors. The module will then analyze
the transmissions sent periodically by the detectors. In the field, the number of packets
received during the last transmission will be shown in parentheses (up to 18). In the
main menu, under the fields corresponding to the particular wireless zones, bars will
appear to illustrate the quality of communication. The shorter the bar and the lower the
number in parentheses, the lower the communication quality. If the field is selected and
the module receives no transmission from a detector for one hour, a trouble will be
reported by the module – the suitable message will be displayed in the GPRS-S
OFT
program (default: the option is disabled).
New detector – the button allows you to add a wireless detector (see: Adding new
wireless devices). If a detector has already been added in the given position, a window
will open with a prompt, whether the detector should be replaced with a new one. If the
answer is affirmative, click “OK” to bring up the new detector adding window. The type
and serial number will be replaced, but the name and the zone type assigned to the old
detector will be retained.
Remove detector – the button allows you to remove a wireless detector (see: Removing
wireless devices).
Test Mode ON / OFF – the button allows y
ou to start / end the test mode in the module.
The test mode enables the wireless and hardwired detectors to be checked for correct
functioning. Detector violation will result in setting the module relay outputs to 300 ms (it
applies to all output types, except for the “no” type). If a signaling device is connected to
the output, each violation of the detector will be suitably signaled. On starting the test
mode, the bars indicating the quality of communication in the main menu for the
wireless detectors will change their color to red, and number 0 will be displayed in the
"Presence check" fields. Only after receiving transmission from a wireless detector will
the information on communication quality be displayed. The test mode will automatically
be ended after 30 minutes. Arming will end the test mode.
Starting the test mode will block signaling the alarm triggered from the TMP zone
programmed as type 1. 24h as well as the tamper alarms triggered by the wireless
detectors and the wireless keypad.
… 22 …


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info