699548
20
Zoom out
Zoom in
Previous page
1/52
Next page
18 MICRA SATEL
the NO type digital zone must be again disconnected from the ground so that the
module can register zone restore,
– resistance will reappear on the EOL type zone, so that the module can register zone
restore,
voltage on the analog zone must rise above threshold L (plus tolerance) or drop
below threshold H (minus tolerance) so that the module can register zone restore
(see Fig. 10).
The defined time makes it possible to reduce the number of sent transmissions. Values
from the 0 to 255 seconds range can be programmed.
Fig. 10. Operation manner of analog zone. 0 – no violation. 1 – violation. L-T – voltage level L
minus tolerance. L – lower voltage level. L+T – voltage level L plus tolerance. H-T – voltage
level H minus tolerance. H – upper voltage level. H+T – voltage level H plus tolerance.
Blocking – option available for the communication device mode. If enabled, the zone will
function as a blocking zone, i.e. its violation will result in blocking other zones of the
module. Only one module zone from among the wired and wireless ones can perform
the function of blocking zone.
Blocked – option available for the communication device mode. If enabled, the zone will
be blocked upon violation of a blocking zone or after receiving by the module of
a suitable control command in SMS message (content of the command being defined in
the “Bypass” field).
Zone type – parameter available in the alarm device mode. You can select one of the
following zone types (you can make your selection in the right-click drop-down menu, or
by entering a digit corresponding to the zone type):
0. I
NSTANT
– instant alarm zone.
1. 24
H
– always armed alarm zone.
2. A
RM
/D
ISARM
(
SWITCH
) – zone violation activates and end of violation deactivates the
armed mode.
3. A
RM
/D
ISARM
(
BUTTON
) – zone violation activates or deactivates the armed mode,
depending on its current status.
4. D
ELAY
– delayed alarm zone. If armed, its violation will start the entry delay
countdown. Unless disarmed, the zone will trigger alarm when the entry delay time
expires.
5. O
UTPUT
ON
1 – violation of the zone will activate the output 1, if the output is of the
C
ONTROLLED
type.
6. O
UTPUT
ON
2 – violation of the zone will activate the output 2, if the output is of the
C
ONTROLLED
type.
20


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info