699548

Satel MICRA Manual

21
Zoom out
Zoom in
Previous page
1/52
Next page
SATEL MICRA 19
7. O
UT
1
ON
(
TIME
) – violation of the zone will activate the output 1 for a preset cut-off
time, if the output is of the C
ONTROLLED
type.
8. O
UT
2
ON
(
TIME
) – violation of the zone will activate the output 2 for a preset cut-off
time, if the output is of the C
ONTROLLED
type.
9. O
UTPUT OFF
1 – violation of the zone will deactivate the output 1, if the output is of the
C
ONTROLLED
type.
10. O
UTPUT OFF
2 – violation of the zone will deactivate the output 2, if the output is of
the C
ONTROLLED
type.
11. 24
H FIRE
– permanently armed zone, dedicated to handling the fire detectors.
12. 24
H SILENT
– permanently armed zone, but the alarm from the zone will not trigger
the loud signaling. Intended to handle e.g. the flood detector.
L threshold – the lower voltage threshold for analog zone. If the voltage drops below the
defined value (minus tolerance), the module will register zone violation. Entering value 0
means that the voltage threshold is not controlled.
H threshold – the upper voltage threshold for analog zone. If the voltage rises above the
defined value (plus tolerance), the module will register zone violation. Entering value 0
means that the voltage threshold is not controlled. The maximum value that can be
programmed is 16.56 V.
Tolerance – the voltage value to be subtracted from the defined value at threshold L when
the voltage drops below threshold L or added to the defined value at threshold H when
the voltage rises above threshold H so that the module can register exceeding the
programmed value / the voltage value to be added to the defined value at threshold L
when the voltage rises above threshold L or subtracted from the defined value at
threshold H when the voltage drops below threshold H so that the module can register
zone restore. The field is available to analog zones.
Output 1 / 2 – fields available for the communication device mode. They allow you to
define, if and how the zone will control the output. Click on the field twice to display
successively:
– blank field – zone does not control the output,
– ON – violation of the zone or exceeding the voltage value at threshold L or H, as
defined for the zone, will activate the output,
– ON for a time – violation of the zone or exceeding the voltage value at threshold L or
H, as defined for the zone, will activate the output for a defined time (cut-off time
must be defined for the output),
– OFF – violation of the zone or exceeding the voltage value at threshold L or H will
deactivate the output.
Wireless zones
Name – individual name of a wireless zone (up to 16 characters).
Type – information on the type of wireless device:
0: no;
1: MMD-300 (magnetic contact);
2: MPD-300 (PIR);
3: MSD-300 (smoke and heat detector);
5: MFD-300 (flood detector);
6: MMD-302 (roller);
7: MGD-300 (glass-break detector).
Serial number – displayed in the field is the detector serial number.
After the detector is added to the system and its serial number is displayed in the
corresponding field, it is advisable to check it with the detector serial number.
… 21 …


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info