699548
23
Zoom out
Zoom in
Previous page
1/52
Next page
SATEL MICRA 21
Output 1 / Output 2
Name – the individual name of relay output.
Output type – parameter available in the alarm device mode. You can select one of the
following types:
Not used – the output is not used.
Burglary alarm – signals:
alarms from the zones of 0. I
NSTANT
, 1. 24
H
and 4. D
ELAYED
types;
tamper alarms triggered by the wireless detectors and the wireless keypad;
panic alarms triggered from the keyfob (the “10: panic alarm” is assigned to the
button);
alarms triggered from the wireless keypad (auxiliary, panic and three wrong codes).
The output is active throughout the preset cut-off time.
Burglary alarm latched – signals the same alarms as the B
URGLARY ALARM
output type,
but remains active until the alarm is cleared.
Arm status – active when armed mode is on.
Controlled – controlled by means of zones, keyfobs or SMS messages.
Fire alarm – signals:
alarms from the 11. 24
H FIRE
zone type;
fire alarm triggered from the wireless keypad.
Fire alarm latched – signals the same alarms as the F
IRE ALARM
output type, but the
output remains active until the alarm is cleared.
NC – if the option is enabled, the output will operate as the NC (normally closed) output.
When the option is disabled, the output will operate as the NO (normally open) output.
Output cut-off time – the time during which the output is to be active. The parameter is valid
when the output is activated for a period of time. If the output cut-off time is not
programmed, activating the output for a period of time will be impossible.
PULSE – the option defines whether the output is to be signaling in the continuous or
pulsating mode (1 / 1 sec.).
Arm/Disarm chirp – option available in the alarm device mode for the B
URGLARY ALARM
and
B
URGLARY ALARM LATCHED
zone types. The output signals the following states by means of
approx. 0.3 second pulses:
arming – 1 pulse;
disarming – 2 pulses;
disarming, if there was an alarm during the armed mode – 4 pulses.
SMS control
Arm / Alarm
The following fields are available for the alarm device mode.
Arm – content of the control command which will be used to arm the module by means of
SMS messages.
Disarm – content of the control command which will be used to disarm the module by
means of SMS messages.
Clear alarm – content of the control command which will be used to clear alarms by
means of SMS messages.
23


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info