699548
24
Zoom out
Zoom in
Previous page
1/52
Next page
22 MICRA SATEL
Output 1 / 2
Control of the outputs by means of commands sent in SMS messages is possible in the
communication device mode and, for the C
ONTROLLED
type outputs, in the alarm device
mode.
Turn on – content of the control command which will be used to activate the relay output.
Turn off – content of the control command which will be used to deactivate the relay
output.
Turn on for period – content of the control command which will be used to activate the
relay output for a period of time (the cut-off time must be defined for the output).
Zones
Bypass – content of the control command that must be included in the SMS message
being sent to the module for the zones to be bypassed (blocked). Depending on the
module operating mode:
communications device – all zones with the “Blocked” option enabled will be blocked.
alarm device – the zones specified in the received SMS message will be bypassed.
The SMS message should have the following form: xxxx=n= (where “xxxx” is the
command, defined in the “Bypass” field, starting the zone bypassing function in the
module; “n” is the number of zone to be bypassed – where two or more zones are to
be bypassed, they must be separated by commas and then the command should
have, for example, the following form: bypass=1,2,3= ). The zone will remain
bypassed until it is unbypassed by using the control command received in the SMS
message.
Unbypass – content of the control command that must be included in the SMS message
being sent to the module for the zones to be unbypassed (unblocked). Depending on
the module operating mode:
communications device – all blocked zones will be unblocked.
alarm device – zones specified in the received SMS message will be unbypassed. The
SMS message should have the following form: yyyy=n= (where “yyyy” is the
command, defined in the "Unbypass" field, starting the zone unbypassing function in
the module; “n” is the number of zone to be unbypassed – where two or more zones
are to be unbypassed, they must be separated by commas and then the command
should have, for example, the following form: unbypass=1,2,3= ).
The armed zones cannot be bypassed / unbypassed (alarm device mode).
Options
The module can be c
ontrolled by using SMS messages. The control commands should be
defined in consecutive tabs. The SMS message to be sent to the module may only contain
one control command. The control command can be composed of up to 24 characters.
SMS control only from list of telephone numbers for messaging – if the option is
enabled, only the SMS messages sent from authorized telephone numbers will allow:
control (arming/disarming, alarm clearing, bypassing/unbypassing zones,
activating/deactivating outputs),
changing the content of text messages used for SMS notifications.
The telephone numbers must be included in the “Telephone numbers for messaging
and test transmissions” list.
Confirm controlling with status SMS – if this option is enabled, starting the control
function (arming/disarming, alarm clearing, bypassing/unbypassing zones,
activating/deactivating outputs) will result in sending by the module of an SMS message
24


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info