699578
30
Zoom out
Zoom in
Previous page
1/40
Next page
28 Programming CA-6
FS101 - programming number of rings before answer (DEC)
The function sets the number of rings after which the CA-6 control panel answers the call
in order to report the alarm system status or to establish communication with the
computer. The programming consists in entering a number from 01 to 15 and confirming it
with the [#] key.
Depending on how the answering option is set (the FS5 function, the second set of
options), the control panel will answer the call immediately after detecting the programmed
number of rings, or on the first ring detected after an interval lasting less than 5 minutes
from detecting the programmed number of rings ("double call").
Notes:
Having answered a call in the "single call" mode, the panel will not answer any more
calls for about 5 minutes so as to enable access to other equipment connected after
the panel (e.g. automatic answering system, fax/modem).
When it is impossible to establish communication with the control panel by the
computer, and the call answering is on, the control panel will only answer the calls
when all defined partitions are armed.
Functions programming TIMERS
The CA-6 control panel is equipped with four TIMERS, which compare the panel clock with
the times set on the TIMERS. If the times are consistent, the timers perform the functions
assigned to them.
FS102 - programming TIMERA 1 (DEC)
The function defines the TIMER 1 ON/OFF hour and minute. The programming consists in
entering four two-digit numbers, the first two denoting the ON time (hour, minute), and the
other two the OFF time (hour, minute). If you want to program the ON or OFF time only
than set one of the times at 99:99 value.
EXAMPLE:
programming the TIMER 1: ON time - 16:30, OFF time - 06:30
[12345] [#] - enter the service mode
[1][0][2] [#] - call the function
[1][6] [#] - program the ON time hours (B LED is blinking)
[3][0] [#] - program the ON time minutes (A LED is blinking)
[0][6] [#] - program the OFF time hours (A & B LEDs are blinking)
[3][0] [#] - program the OFF time minutes and exit the function (B LED is blinking)
FS103 - programming TIMERA 2 (DEC)
FS104 - programming TIMERA 3 (DEC)
FS105 - programming TIMERA 4 (DEC)
FS106 - programming TIMER functions (DEC)
The function defines how the timers are used. They can control outputs or partitions.
The programming consists in entering four characters from 0 to 9 (2× two characters). The
first character defines the TIMER 1 function, the second - TIMER 2, the third - TIMER 3,
and the fourth - TIMER 4.
Note: The outputs indicated in this function, irrespective of their type, are controlled by
TIMER – as distinct from the CA-10 control panel, where the timers control only
the TIMER type outputs.
TIMER functions:
0 - TIMER not used
1 - controls output OUT1
2 - controls output OUT2
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info