699578
32
Zoom out
Zoom in
Previous page
1/40
Next page
30 Programming CA-6
The keypad with incorrect address is not supported by the control panel. The
address is not controlled, when the panel is in the service mode.
The keypad address is set by the control panel automatically when the default settings are
being programmed (the panel reads out setting of the jumpers and stores it in memory).
The FS111 function enables to check the keypad address and program it. It is necessary
that the same address would be also set by means of the jumpers. It means that the
address set on the keypad pins and the one programmed with this function must be
identical.
The programming in FS111 function consists in lighting up the LEDs 1 to 4, which
correspond to the jumper settings. The settings need to be confirmed with the [#] key.
The [
*
] key enables to quit the function.
Fig. 3. Setting of the jumpers and corresponding LEDs during programming procedure in
the CA-6 KLED keypad.
Notes:
The control panel does not support keypad in which either all jumpers or no jumpers
are set.
When programming the keypad address be particularly careful, as having
programmed a wrong address may trigger a tamper alarm at the moment you exit
the service mode and cause a loss of control from the keypad. Then it is necessary
to enter the service mode by hardware means and read the new address (see:
Installer Manual).
The new address (as most of the programmed parameters of the panel) will become
valid after exiting the service mode or when the panel is being programmed from the
computer - after the data are sent.
Automatic readout of the keypad address without changing the other control panel
parameters is possible by means of the FS124 function.
FS112 - start of programming from computer in local mode
The function starts the programming mode through a modem or RS-232 TTL port. The
function is called upon a prompt from the computer. Prior to using the function, hook up
the control panel to the computer (see: Installer Manual). Start the DLOAD10 program on
the computer. After calling the function, the panel will first try to establish connection
through the RS port, and if fails, via the telephone line.
address
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info