699578
31
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 29
3 - controls output OUT3
4 - controls output OUT4
5 - controls output OUT5
6 - not used – do not program
7 - partition control timer (guard rounds)
8 - controls A partition
9 - controls B partition
Note: Do not program the values 6 and A to F. The partition control function (7) can
only be programmed for timer 1 (A partition control) and timer 2 (B partition
control).
The Guard rounds control requires the following parameters:
guard code in the controlled partition (a code with authority level 5 it also performs
the function of activating the MONO SWITCH).
partition control timer – the hour and minute set for switching on this timer defines
the maximum time that may elapse since the last time the guard code was entered - if
it is exceeded, the “no control code” event is recorded in the memory, the information
is sent to the monitoring station, and the “no guard round” type output is activated.
Entering the code by the guard is recorded in the event memory as the “entry/exit”
event.
EXAMPLE:
programming the function: TIMER1 - controls A partition, TIMER 2 - controls OUT4
output, TIMER 3 and TIMER 4 - control OUT5 output.
[12345] [#] - enter the service mode
[1][0][6] [#] - call the function
[8][4] [#] - program the timers 1 and 2 functions (B diode is blinking)
[5][5] [#] - program the timers 3 and 4 functions (A diode is blinking) and exit the function
Special functions
FS107 - restoring default settings
Calling this function will restore all the factory default settings of the control panel
parameters (see: „Default settings” section, Installer Instruction) and will automatically read
the current address of the keypads. The service code is set as [1][2][3][4][5]. The function
does not change the user access codes.
FS108 - clearing event log
Calling this function will erase the memory of events.
FS109 - restoring default communication passwords
Calling this function will restore the factory default control panel and computer identifiers
(see: FS2, FS3), which are required to establish communication with the computer. These
settings are used for testing the control panel.
FS110 - restoring default codes
Calling this function will erase all the user access codes and restore the default MASTER
code [1][2][3][4] and the default service code [1][2][3][4][5].
FS111 - programming keypad address (BIT)
The keypad of CA-6 control panel has its individual address, which is set with jumpers.
The panel imports this address together with other keypad data (zone state, depressed
keys, tamper contact state) and compares with the address programmed in the nonvolatile
memory. If a difference is detected, a tamper alarm is triggered.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info