699578
29
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 27
depressed keys, and when transmitting the message, it generates corresponding two-tone
signals, according to the telephony standard. After
calling the function, the panel enters the numerical
mode (identically, as the POLPAGER exchange).
Each depression of a key means that a corresponding
digit has been added to the message. Changeover to
the text mode follows a double depression of the [
*
]
key. When in the text mode, each key (from 1 to 9)
has three letters assigned to it (Fig. 2). If you want to
choose the middle letter, press the key with that letter.
If you want to choose the letter on the left side of a
key, press that key and [
*
]. The letter on the right side
of a key can be accessed by pressing that key and
[#]. To access the space, press the [0] key. The dash
is accessible by pressing the [0][
*
] keys. Changeover
from the text to numerical mode is effected after
pressing the [0][#] keys.
The message programming is ended after pressing the [#] key when the control panel is in
the numerical mode, while the next depression of [#] results in exiting the function.
The control panel saves in memory 96 keystrokes. At an attempt to enter a longer
message, the panel quits the function (adding # or 0## if it was in the text mode).
EXAMPLE:
programming the ALARM message
[12345] [#] - enter the service mode
[9][6] [#] - call the function (programming the 1
st
message)
[
*
] [
*
] - activate the text mode
[2] [
*
] - A
[5] [#] - L
[2] [
*
] - A
[7] - R
[6] [
*
] - M
[0] [#] - change over to the numerical mode
[#] - end the message
[#] - press the key until the function is finished
Messaging – programming of messaging parameters
FS100 - programming number of rounds and redial number in a round (DEC)
The function is used to program two parameters of the telephone communicator which
define how the messaging works. These parameters are:
number of message rounds (from 1 to 7) – setting a greater number gives a better
reliability of reporting,
number of dialing retries within one round (from 1 to 9, and if 0 is entered – until
a successful transmission). This parameter has been introduced so as to avoid
blocking of the telephone line continuously dialing the number which cannot be
reached (when nobody answers the call or the panel receives the busy signal all the
time, etc.).
The programming consists in entering two digits (the LEDs from 1 to 4 show the 1
st
parameter – number of retries, LEDs 5-8 show the 2
nd
one – number of rounds). The first
of them refers to the number of redials, the second – to the number of rounds. Having
programmed these parameters, press the [#] key to confirm and exit the function.
Fig. 2.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info