699578
26
Zoom out
Zoom in
Previous page
1/40
Next page
24 Programming CA-6
11  Panic alarm (from keypad)
12  Medical alarm (from keypad)
13  Alarm - keypad tamper
14  Alarm 3 incorrect codes
Notes:
The code 3 is recorded in the event log when the control panel is unable to establish
communication with the station. In that case, the control panel will retry after 60
seconds to establish connection. When it gets through, the control panel will transmit
all the unsent events from the memory. The events are sent by the panel in order of
their occurrence (the oldest event is sent first).
The code 4 is recorded in the event log when lack of communication with the station
lasted so long that all the memory intended for the events (255 events) has been filled
up and the oldest events have been erased.
The code 9 can be extended by the control panel with the user number.
FS83 - programming system event assignment to station 1 (BIT)
When the mode of notifying both stations is active, it is possible to determine for most
events, whether they will be transmitted to the station 1, station 2, or to both stations. The
other system events are reported to both stations.
The programming is a three-stage procedure, which consists in specifying events which
are to be sent to the station 1.
First stage - 1 to 8 LEDs show the following events (the lower B diode blinks):
1 - AC loss
2 - AC power restore
3 - Battery trouble
4 - Battery OK
5 - OUT1 trouble
6 - OUT1 trouble restore
7 - OUT2 trouble
8 - OUT2 trouble restore
Second stage - 1 to 6 LEDs show the following events (the lower A diode blinks):
1 - OUT3 trouble
2 - OUT3 trouble restore
3 - Service mode - start
4 - Service mode - end
5 - DOWNLOADING - start
6 - DOWNLOADING - end
Third stage - 1 to 5 LEDs show the following events (the A and B diodes blink):
1 - Fire alarm (from keypad)
2 - Panic alarm (from keypad)
3 - Medical alarm (from keypad)
4 - Alarm - keypad tamper
5 - Alarm 3 incorrect codes
FS84 - programming system event assignment to station 2 (BIT)
The function makes it possible to select system events sent to the station 2, when the
mode of reporting to both stations is active. The programming procedure is identical as in
FS83.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info