699578
25
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 23
Programming is carried out in two stages (the jump to the second set takes place after the
[#] key is pressed). In the first set (the lower B LED is blinking), the events 1-8, to which
LEDs 1-8 correspond, are programmed (as in FS69). In the second set (the lower A LED is
blinking), the following events are programmed: guard round – LED 1, no guard round–
LED 2, alarm clearance – LED 3.
FS77 - programming A partition event assignment to station 2 (BIT)
FS78 - programming B partition event assignment to station 2 (BIT)
The functions FS77 and FS78 define which partition events will be reported to the second
monitoring station when the mode of reporting to both stations is activated.
Monitoring - programming system event codes
Apart from the events from zones and partitions, the CA-6 can show information on system
events (mainly related to the detected troubles). The system event codes are programmed in
the same way as the zone event codes.
FS81 - programming system event codes - set I (HEX)
The function enables first fourteen system events to be programmed. The programming
procedure is the same as in FS69 function.
Number AB, AB diode state Event
1  AC loss
2  AC power restore
3  Battery trouble
4  Battery OK
5  OUT1 trouble
6  OUT1 trouble restore
7  OUT2 trouble
8  OUT2 trouble restore
9  OUT3 trouble
10  OUT3 trouble restore
11  Service mode - start
12  Service mode - end
13  DOWNLOADING - start
14  DOWNLOADING - end
FS82 - programming system event codes - set II (HEX)
The function enables the system events of the second set to be programmed. The
programming procedure is the same as in FS69.
Number AB, AB diode state Event
1  keypad supply trouble
2  keypad supply trouble
3  Reporting trouble
4  Station buffer overflow
5  Clock loss
6  RAM memory error
7  Panel restart
8  Periodical reporting test
9  Clock setting *
10  Fire alarm (from keypad)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info