699578
14
Zoom out
Zoom in
Previous page
1/36
Next page
12 SATEL Installer Manual
Explanations for Fig. 2:
1. Emergency power supply cables connect the red one to the battery terminal “+” and the
black one to the battery terminal “-“. The battery cables lugs should not be cut off.
2. The J13 RESET pins make it possible to start the service mode without entering
a service code. This function can be disabled by the installer with software means (see:
FS131).
3. RJ socket for connection of the control panel RS-232 port to the computer COM port the
RS-232 (TTL) port is intended for programming the alarm system parameters from the
computer. As the control panel sends and receives a TTL standard signal (0 V, +5 V),
the control panel and the computer ports must be connected with a special cable
manufactured by SATEL. The cable includes a converter changing the signal into
a standard corresponding to the RS-232 port in the computer (-12 V, +12 V). The data can
be transmitted through the cable in both directions. For programming, a cable available
in the kit designated DB9FC/RJ-KPL is required.
AC AC
COM OUT2
COM
OUT3
DTA
CLK
CTL COMZ1
Z2
Z3
COMCOM
18V
TIP
RING T-1 R-1
DIALER
RESET
J13
OUT1
Z5
Z4 COM Z6KPD
+
COM
COM OUT5
OUT4
+
12V
SM-2
VOICE
SYNTHESIZER
1
2
3
4
RS232 TTL
Fig. 2. Schematic view of CA-6 main board.
Notes:
The RS-232 port may only be used when programming the panel. Never leave the RS
cable permanently attached.
Do not close or touch the connector pins with your fingers.
Prior to connecting the cable, the installer should first remove the electrostatic charge
e.g. touching a grounded fixture (a faucet or a heater) with the top of his hand.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info