699578
13
Zoom out
Zoom in
Previous page
1/36
Next page
CA-6 SATEL 11
In the ON LINE mode, the computer displays current information on the system state,
including zone violations, active outputs, control panel clock, and selected partition state. It is
possible to control the system in the same way as with a LED keypad. The keypad on the
computer screen works in parallel with the real keypads in partitions, therefore commands for
all partitions can be given from one place. The ON LINE mode also permits downloading
troubles and programming the clock.
The program does not download or change the users’ access codes they are only
accessible through the user functions from keypads.
The programming can be performed directly from the RS-232 port of the computer through
the RS port of the control panel (TTL standard signals), or by means of a modem, through
the TIP and RING terminals of telephone line.
Communication through the telephone line can be initialized in three modes:
1. The computer calls the control panel, which after answering the call exchanges
communication passwords with the computer. When they are correct, the panel confirms
acceptance of the remote programming command, hangs up and calls back to the
computer using a number preprogrammed in the control panel. Prior to calling the
computer back, the panel notifies the monitoring station that the programming has
started.
2. The computer calls the control panel and, after the communication passwords exchange,
the control panel immediately proceeds to the exchange of data. This simplified mode of
establishing communication is reached when the computer telephone number is not
entered in the control panel. Notification of the monitoring station will take place after
communication with the computer is over.
3. Establishing of communication from the control panel by calling the function 0 by the
partition master user. The control panel first notifies the monitoring station that the
programming has started (when monitoring is active), then it dials the computer
telephone number.
Communication initialization from the computer can be blocked (FS5, Options set 2, Option 1).
In order to reduce the cost of telephone connections, multiple suspension of the transmission
is possible. At the next connection, the control panel does not inform the monitoring station of
remote programming. Only after receiving the command to end the communication,
a message on completing the remote programming is sent to the station. When the
communication is suspended from the computer, the control panel is waiting for a call from
the computer for four hours even when the functions of automatically answering the computer
call are disabled. When the communication is ended with the “end” command instead of
“suspend”, the information on ending the communication is entered into the event log and
sent to the monitoring station after four hours.
As the control panel is only accessible to the service, a number of protective devices has
been provided to prevent hacking of the system and change of any data by unauthorized
persons. All the data exchanges are authorized by changing the passwords and the data are
encoded.
INSTALLATION OF THE CONTROL PANEL
Description of control panel main board
The control panel main board contains electronic components sensitive to electric charges.
Prior to installation, these charges must be removed. During installation, avoid touching any
elements on the control panel main board.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info