699578
12
Zoom out
Zoom in
Previous page
1/36
Next page
10 SATEL Installer Manual
which waits for one specific signal for a predetermined period of time and only redials upon
detecting that that signal has not occurred.
Dialer
The CA-6 is equipped with a telephone dialer, which enables an alarm voice message to be
transmitted. The message is stored in an external synthesizer. The control panel directly
interfaces with the SATEL SM-2 voice synthesizer. The dialer can also establish connections
with paging systems. Two different alphanumeric messages can be programmed.
The CA-6 allows programming of four telephone numbers, 16 characters each. The numbers
can be individually assigned to partitions, or, alternatively, one number can be assigned to
both partitions. As the control panel is capable of establishing connections with paging
systems, each number can be assigned one of the two text messages, or a voice message
from the synthesizer.
During the procedure of connection setup, the panel controls signals from the telephone line
(algorithm ToneLOGIC). Hence, it can recognize that the call is answered, irrespective of the
type of telephone exchange. In order to enhance the efficiency of messaging, it is possible to
increase the number of calling rounds.
Messaging for each telephone number is realized in accordance with the following
parameters:
round count (1 to 7) defines how many times it is necessary to call and send
information to each number,
max. redial number for one round (1 to 9) number of attempts, after which the
panel will stop dialing the number, for which connection cannot be established
(no answer, permanently busy, etc.).
Messaging can be carried on until successful. It is also possible to determine the maximum
number of retries (from 1 to 9), after which the panel stops dialing the number for which
connection cannot be established (no answer, permanently busy, etc.). When waiting for the
dial tone during dialing (code D, when the control panel is connected to an extension line and
is trying to get the outside line), detecting the busy signal does not decrease the counter of
rounds and attempts.
The control panel dialer function can answer the calls and give information on the system
state with a voice message (if one hour has not elapsed yet after the alarm) or with special
signals (one beep a second if there was no alarm, or five short beeps every second if one
hour has elapsed from the alarm).
Another way of getting information on the system state via the telephone is through the
control panel operation in conjunction with the SATEL MST-1 module (service function
FS131). Additionally, this module enables the system to be remotely controlled, within certain
limits, by means of DTMF signals. For the connection diagram refer to the MST-1 module
operating instructions.
Remote Programming – DOWNLOADING
In order to facilitate programming, the CA-6 is equipped with a DOWNLOADING function,
which enables a PC computer to be used for programming and controlling of the alarm
system by means of the DLOAD10 program.
The DLOAD10 program, which is delivered with the control panel, enables:
reading all control panel parameters,
writing new parameters to the control panel,
reading the system event log,
ONLINE operation.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info