699578
7
Zoom out
Zoom in
Previous page
1/36
Next page
CA-6 SATEL 5
00 not used – remains inactive from the power-up, according to the setting of "polarity" option.
01 burglary the output starts on detecting a burglary alarm by the control panel. The alarm is
triggered by armed zones, zones tamper circuits, keypads tamper contacts, and by the
user (through the ALARM PANIC function). If the zones to which the output is to react are
defined, the zone alarms will be limited to those included in the "list of zones" (the other
alarms will be effected irrespective of the source). It is also possible to indicate (in the
output options) the partition the output is associated with. If this is the case, the zone
alarms will be limited to those from the zones belonging to the chosen partition. When the
"list of zones" is empty and there are no chosen partitions, the output reacts to all alarms
(except for the fire alarms).
The output can remain active for a specified time (from 01 to 99 seconds or from 01 to 99
minutes) or until the alarm is cleared by the user. During its operation, it can every second
change its state (pulsate).
02 fire/burglary the output starts on detecting by the control panel of a burglary alarm
(continuous signal) and/or a fire alarm (intermittent signal). The output operation can be
limited to the indicated "list of zones" or a specific partition (identically as for the 01 output
type). The output can remain active for a specified time (from 01 to 99 seconds or from 01
to 99 minutes) or until the alarm is cleared by the user.
03 fire the output starts when the control panel detects a fire alarm. Such an alarm is triggered
by fire zones or the user (through the ALARM FIRE function). The output operation can
be limited to the specified "list of zones" or particular partitions (identically as for the 01
output type). There is no sense to choose any other zones than the fire ones, as they
would not generate a fire alarm. The output can remain active for a specified time (from 01
to 99 seconds or from 01 to 99 minutes) or until the alarm is cleared by the user. During
operation, it can every second change its state (pulsate).
04 keypad alarms the output starts on detecting any keypad alarm. The output can remain
active for a specified time (from 01 to 99 seconds or from 01 to 99 minutes) or until the
alarm is cleared by the user. During its operation, it can every second change its state
(pulsate).
05 keypad fire alarm the output starts on triggering the fire alarm by the user (with the FIRE
ALARM function). The output can remain active for a specified time (from 01 to 99
seconds or from 01 to 99 minutes) or until the alarm is cleared by the user. During
operation, it can every second change its state (pulsate).
06 keypad panic alarm the output starts on triggering the PANIC alarm by the user.
The output can remain active for a specified time (from 01 to 99 seconds or from 01 to 99
minutes) or until the alarm is cleared by the user. During operation, it can every second
change its state (pulsate).
07 keypad aux. alarm the output starts on triggering the alarm by the user with the ALARM
AUX function. The output can remain active for a specified time (from 01 to 99 seconds or
from 01 to 99 minutes) or until the alarm is cleared by the user. During operation, it can
every second change its state (pulsate).
08 keypad tamper alarm the output starts on detecting violation of the tamper contact or a
change of the keypad address and also after 3 wrong codes. The output can remain
active for a specified time (from 01 to 99 seconds or from 01 to 99 minutes) or until the
alarm is cleared by the user. During operation, it can every second change its state
(pulsate).
09 day/night + counting the output starts on detecting violation of disarmed DAY/NIGHT zone
or violations (triggering no alarm) of COUNTING zones, which trigger no alarm. Operation
of the output can be restricted to a specified “list of zones” (identically as for the 01 output
type). Selection of any other zones than those tested by this output type is irrelevant - they
will give no violation signal. The output can remain active for a specified time (from 01 to
99 seconds or from 01 to 99 minutes) or until the alarm is cleared by the user. During
operation, it can every second change its state (pulsate).
10 duress alarm the output starts on using an access code with authority level 4 (DURESS
code) to disarm the system or to clear an alarm. This code is used to trigger a
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info