699577
41
Zoom out
Zoom in
Previous page
1/60
Next page
SATEL CA-10 39
EXAMPLE:
programming of the following settings (assuming that LEDs 1 to 8 for all numbers are off)
1
st
telephone number -voice message from synthesizer, with alarm in partition 1,2, 3,
2
nd
telephone number - message No. 2 (pager), with alarm in partition 1,
3
rd
and 4
th
tel. number - voice message from synthesizer, after alarm in partition 3
other numbers not used
[9][5] [#] - call the function (LED 12 is blinking - 1
st
number)
[1][2][3] - LEDs 1, 2 & 3 go on (number 1 assigned to partitions 1, 2 & 3) other LEDs are off
[#] - confirm assignment for number 1 (LED 11 is blinking - 2
nd
number)
[1] - LED 1 goes on (number 2 assigned to partition 1)
[6] - LED 6 goes on (message 2 assigned to number 2)
[#] - confirm assignment for number 2 (LEDs 11, 12 are blinking - 3
rd
number)
[3] - LED 3 goes on (number 3 assigned to partition 3)
[#] - confirm assignment for number 3 (LED 10 is blinking - 4
th
number)
[3] - LED 3 goes on (number 4 assigned to partition 3)
[#] - confirm assignment for number 4 (LEDs 10, 12 are blinking - 5
th
number)
[
*
] - exit the function. As for the other numbers all the LEDs 1 to 8 are off, the control panel will
not dial those numbers.
In the LCD keypads, the programming is carried out by means of the arrow keys and the
numeric keys. The keys and scroll the list of telephone numbers, the numeric keys 1-4
are used for selecting the partition which will be assigned to the given telephone number,
the keys and assign a corresponding message to the given telephone number (the
message can also be assigned by means of the numeric keys 5-9 and 0).
Messaging – programming of PAGER messages
FS96 - programming message 1 (POLPAGER format)
FS97 - programming message 2 (POLPAGER)
FS98 - programming message 3 (POLPAGER)
FS99 - programming message 4 (POLPAGER)
The message is programmed in the same way as with direct telephone messaging to the
POLPAGER receiver. The control panel saves in its memory the consecutively depressed
keys, and when transmitting the message, it generates corresponding two-tone signals,
according to the telephony standard.
After calling the function, the panel enters the numerical mode (identically, as the
POLPAGER exchange). Each depression of a key means that a corresponding digit has
been added to the message.
In the LED keypad changeover to the text mode follows
a double depression of the [
*
] key. When in the text
mode, each key (from 1 to 9) has three letters assigned
to it (see figure 2). Pressing a key means selection of the
middle letter. Pressing in turn the key and [
*
] means
selection of the left-hand letter. The letter on the right
side of a key can be accessed by pressing that key and
[#]. To access the space, press the [0] key. The dash is
accessible by pressing the [0][
*
] keys. Changeover from
the text to numerical mode is effected after pressing the
[0][#] keys.
The message programming is ended after pressing the
[#] key when the control panel is in the numerical mode,
while the next depression of [#] results in exiting the
1 2 3
4 5 6
789
0
#
*
Q . Z A B C D E F
G H I J K L M N O
P R S T U V W X Y
Figure 2.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info