699577
42
Zoom out
Zoom in
Previous page
1/60
Next page
40 Programming SATEL
function.
The control panel saves in memory 80 keystrokes. At an attempt to enter a longer message,
the panel quits the function (adding # or 0## if it was in the text mode).
EXAMPLE:
programming the ALARM message
[9][6] [#] - call the function (LED 9 is blinking - programming the 1
st
message)
[
*
] [
*
] - activate the text mode
[2] [
*
] - A
[5] [#] - L
[2] [
*
] - A
[7] [
*
] - R
[6] [
*
] - M
[0] [#] - change over to the numerical mode
[#] - end the message
[#] - exit the function.
In the LCD keypads, one-time pressing the key [
*
] results in changeover to the text mode
(programming details see: „Editing texts in LCD keypads”).
Messaging – programming of messaging parameters
FS100 - programming number of queues and retries in a queue (DEC)
The function is used to program two parameters of the telephone communicator which define
how the messaging works. These parameters are:
number of message queues (from 1 to 7) - setting a greater number gives a better
reliability of reporting,
number of dialing retries within one queue (from 1 to 9, and if 0 is entered - until a
successful transmission). This parameter has been introduced so as to avoid blocking of
the telephone line continuously dialing the number which cannot be reached (when
nobody answers the call or the panel receives the busy signal all the time, etc.).
In the LED keypads the programming consists in entering two digits. The first of them
refers to the number of retries, the second - to the number of message queues.
In the LCD keypads, starting the function will display the number of reties in a message
queue, which is defined by entering the selected digit. To proceed to programming the
second parameter, press the key or .
FS101 - programming number of rings before answer (DEC)
The function sets the number of rings after which the CA-10 control panel will answer the call
in order to report the alarm system status or to establish communication with the computer.
The programming consists in entering a number from 00 to 07.
Depending on how the answering option is set (function FS 5, 8 bit in the second set of
options), the control panel will answer the call immediately after detecting the programmed
number of rings, or on the first ring detected after an interval lasting less than 5 minutes from
detecting the programmed number of rings ("double call").
Notes:
Having answered a call in the "single call" mode, the panel will not answer any more
calls for about 5 minutes so as to enable access to other equipment connected after the
panel (e.g. automatic answering system, fax/modem).
When the option to establish communication with the control panel by the computer is
disabled, and the call answering is on, the control panel will only answer the calls when
all defined partitions are armed.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info