Pos: 25.6 /Innenteil/Pflege und Wartung des Mähers/1.1 Reinigung (Abbildung O ) @ 0\mod_1115363511390_1521.docx @ 1817 @ 2 @ 1
Cleaning (Illustration O )
Pos: 25.7 /Innenteil/Pflege und Wartung des Mähers/Reinigung Text Benzin mit Kraftstoffhahn Subaru BBC @ 32\mod_1406103474036_1521.docx @ 236779 @ @ 1
IMPORTANT
During cleaning and maintenance work, always close the fuel tap A , tilt the
mower forwards O (spark plug facing upwards). If it should become necessary
to place the mower on its side, then place it on the exhaust side, never on the
carburetor side, as otherwise start-up problems could occur.
When tilting the mower forwards make sure the ejection flap does not get
damaged. Secure the mower in its raised position!
NOTE
When tilting or placing the mower on its side, ensure that no oil or fuel comes out
of the machine. Fire hazard!
Remove dirt and grass residue immediately after finishing mowing. Use a brush or cloth
to clean.
NOTE
Do not put your fingers into the openings of the fan housing and hold onto the
fan. If the blade bar is rotated during cleaning, there is a risk that your fingers
may become caught between the fan and the fan housing!
IMPORTANT
Never use a pressure cleaner or ordinary water jet to clean the drive section,
motor parts (like ignition system, carburettor etc.), and bearings. Damages or
expensive repairs can be the consequence of such action.
IMPORTANT
If the underside of the mower is accidentally cleaned with water, immediately
start the motor again and turn on the blades. Any remaining water may damage
the components (e.g. ball bearings), thus allow the coupling to operate for
several minutes to ensure that the water is thrown out of the components.
Pos: 25.8 /Innenteil/Pflege und Wartung des Mähers/1.1 Aufbewahrung @ 0\mod_1115363938281_1521.docx @ 1810 @ 2 @ 1
Storage
Pos: 25.9 /Innenteil/Pflege und Wartung des Mähers/Aufbewahrung Text @ 0\mod_1115364661953_1521.docx @ 1824 @ @ 1
Always keep the machine in a clean condition in a closed, dry room out of reach of
children. Always allow the engine to cool down before you store the machine in a
closed room.
Pos: 25.10 /Innenteil/Pflege und Wartung des Mähers/1.1 Umklappen des Führungsholmes (Abbildung A1) @ 1\mod_1132311550241_1521.docx @ 5669 @ 2 @ 1
Collapsing the handle (Illustration A1 )
Pos: 25.11 /Innenteil/Pflege und Wartung des Mähers/Umklappen des Führungsholmes Text 47er Redesign/54er SABO+JD, Schnellspanner @ 43\mod_1465384751758_1521.docx @ 499091 @ @ 1
– For space-saving storage space or for transportation, open the quick releases,
loosen the wing nuts / handle nuts such that the handlebar can be folded together
without resistance in Z-shape above the engine A1 .
The locking cams on the lower end of the bar have to snap out of the holes
in the housing.
– Do not kink nor squeeze the throttle cables in the process.
47-K VARIO B, R47KB
CAUTION
When the bar is moved for transport and storage purposes, the bar may fold over
unintentionally during opening of the quick releases, loosening of the wing nuts
and snapping of the locking cams out of the holes in the housing. In addition,
crushing spots can occur between the base and top of the bar and the housing.
This may result in risk of injury.
54-K VARIO B, JX90
CAUTION
When the bar is moved for transport and storage purposes, the bar may fold over
unintentionally during opening of the quick releases, loosening of the handle
nuts and snapping of the locking cams out of the holes in the bar connection. In
addition, crushing spots can occur between the base and top of the bar and the
bar connection/housing. This may result in risk of injury.
Pos: 25.12 /Innenteil/Pflege und Wartung des Mähers/1.1 Transport und Sicherung des Gerätes (Abbildung N ) @ 10\mod_1250083705506_1521.docx @ 85935 @ 2 @ 1
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sabo 54-K VARIO B at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sabo 54-K VARIO B in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 3,73 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
