713982

Rommelsbacher EBC3477TC Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
22
Selecting the power level to continue
Within 10 seconds after activation of the automatic cooking function the power level to continue can be
set using the MINUS sensor. Within another 3 seconds adjustments can be made using the PLUS or the
MINUS sensor. In doing so, the alternating mode of the display is being suspended.
3 seconds after the final setting the display changes back to alternating mode. Using the PLUS sensor
you can set a higher continuative power level at any time while the automatic cooking function is being
activated. Provided that no continuative power level is selected within 10 seconds after activation of the
automatic cooking function, the automatic cooking function is cancelled.
Deactivating the automatic cooking function
By activating the MINUS sensor once the 10-second period for adjustment has elapsed, the automatic
cooking function can be cancelled even prior to completion of the preheat phase. Likewise, the automatic
cooking function will be routinely cancelled if the maximum power level is set later on.
Residual heat indicator
The residual heat indicator cautions against the heat still existing on a cooking zone due
to the waste heat of the pot. The “H” symbol will appear on the respective display. Do not
touch that cooking zone.
The residual heat indicator of each cooking zone will remain activated even in
OFF mode.
TIMER sensors [5]/[8]
How the timer works
The electronic control provides a timer for each of the two cooking zones. It can be used as
either a cooking zone timer or an independent timekeeper.
The two 7-segment displays of the respective cooking zone are turning into indicators
showing the remaining time in minutes until an audible timer signal is released.
The timers are designed as “countdown timers”. Their possible setting range is 1 to 99
minutes. Having set the timer, it counts down the time to 0 in minute steps.
Thereafter, both a visual and an audible signal are released.
Activating the timer
• Activating the TIMER sensor [5] for the large cooking zone, or [8] for the small cooking zone, means
setting the timer module for the respective cooking zone. How the control responds to the activation of
the timer sensor is subject to the preset operating mode:
a) The cooking zone belonging to the timer has been activated (power level setting > 0):
The timer is programmed in relation to the cooking zone. Having counted down it deactivates the
cooking zone automatically. An independent timekeeper cannot be activated.
Activating the TIMER sensor anew will immediately restore the power level setting mode.
b) The cooking zone belonging to the timer is in OFF position (power setting level = 0):
The timer is programmed as a timekeeper without any switching function. It will keep on counting
even in OFF position. As long as the timekeeper is counting, the respective cooking zone cannot be
activated. The remaining running period of the timer is always being indicated.
• The signalling of whether a cooking zone or a timer period is being programmed via the PLUS/MINUS
sensors is indicated by the LED above the respective indicator (LED [10] for the large cooking zone,
or LED [11] for the small cooking zone). A blinking timer LED shows that the value appearing on the
7-segment display relates to the timer and can be altered using the PLUS/MINUS sensors.
• The 7-segment display of a timer not having been programmed so far is indicating “00”, with the timer
LED blinking after activation of the timer sensor. When a timer has already been programmed, the
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EBC3477TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3477TC in the language / languages: English, German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info