713982

Rommelsbacher EBC3477TC Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
24
Safety functions
This cooking hob features numerous safety functions safeguarding the user as well as the appliance
against any accidental or hazardous operating conditions.
Key lock
This function allows for sensors to be locked, preventing any accidental change of the
operating state. It provides for the control to proceed in the preset mode (wait or active
mode) without any sensor permitting activation, except for the unlock combination and
the ON/OFF sensor.
Activating the key lock
To lock the control, the TIMER sensor of any cooking zone [5] or [8] and the MINUS sensor of the same
cooking zone [4] for TIMER SENSOR [5], or [7] for TIMER sensor [8]; must be activated simultaneously.
Touch the TIMER sensor first and keep your finger on the sensor. Then additionally touch the MINUS sensor
within 2 seconds. The LEDs [9a and 9b] above the TIMER sensors are glowing to signal the active locking
mechanism.
Cancelling the key lock
To release the sensors again, the TIMER sensor of any cooking zone [5] or [8] and the MINUS sensor of the
same cooking zone [4] for TIMER SENSOR [5], or [7] for TIMER sensor [8] must be simultaneously activated
anew. Touch the TIMER sensor first and keep your finger on the sensor. Then touch the MINUS sensor in
addition within 2 seconds. With the LEDs [9a and 9b] above the TIMER sensors extinguishing, all sensors
can be activated again.
Switching off using the ON/OFF sensor [1] with key lock activated
When the control is deactivated using the ON/OFF sensor [1] while the key lock is active, the LEDs [9a and
9b] above the TIMER sensors extinguish as well. When switching on anew, the key lock is active again
until it is cancelled as described above!
Safety shut-down during permanent activation
Activating one or several sensors for longer than 10 seconds (e. g., through objects or spilt
food left on the control panel) will prompt an audible signal and the lightning symbol, as
depicted on the left, for a period of 5 seconds.
In that case, eliminate the error cause. Then put the appliance into operation anew.
Activating the ON/OFF sensor permanently will cause the appliance to switch off.
Restarting the appliance is not possible until the error is eliminated!
Multiple activations
Activating several sensors simultaneously will not prompt any function. There will be no visual or audible
signals in the absence of permanent activation.
Temperature monitoring of the control
The control electronics is equipped with a temperature sensor underneath the glass ceramics. The
monitoring falls into two phases.
Exceeding the first (lower) temperature limit on the electronics will cause the control to automatically
reduce the power settings of both cooking zones to levels 8 and 11, respectively, to prevent any further
increase in temperature. However, the display will continue to show the preset power level!
Exceeding the second (upper) temperature limit on the electronics will cause both cooking zones to switch
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EBC3477TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3477TC in the language / languages: English, German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info