713982

Rommelsbacher EBC3477TC Manual

25
Zoom out
Zoom in
Previous page
1/28
Next page
25
off automatically, with error code “F2” (excess temperature) appearing on the display.
Operating time limitation
The operating time limitation causes the cooking zone to switch off automatically, provided the settings
have not been readjusted for a certain period of time. The operating time limitation is dependent on the
respective power level setting. After automatic switch-off the cooking zone can be reactivated, with the
maximum operating time being active again.
On the other hand, timer settings take priority over the operating time limitation facility, i. e. the cooking
zone will only get deactivated once the timer count-down is completed, but not when required by the
operating time limitation!
Error codes
The electronic control comes equipped with several integrated monitoring functions. When an error occurs
which can be clearly allocated to a single cooking zone, the power supply to the cooking zone concerned
is cut off, with an error code emerging on the respective display. On the contrary, when a general type
of error is recognised, the entire control system is switched off, with an error code emerging on the
respective display.
As long as an error prevails, the affected cooking zone and the entire control system cannot be activated
anew!
General errors
Self-help is normally not possible in the event of general errors – the appliance has to be forwarded to the
customer service in any case.
Indication Description
U400 Internal connection error
ErXX General internal error of the electronic control
Errors relating to cooking zones
Provided that the self-help described does not work out or is not practicable, the appliance has to be
forwarded to the customer service.
Indication Description
F2 The temperature on the control has exceeded the maximum permissible value (see also
“temperature monitoring of the control”).
Self-help: Eliminate the cause of overheating. When the cooking surface has cooled down,
the cooking zone can be put into operation again.
A sensor has been permanently activated (for at least 10 seconds) (see also “safety shut-
down during permanent activation”).
Self-help: Eliminate the cause of permanent activation. Having cleaned the surface area of
the sensor, the cooking zone can be put into operation again.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EBC3477TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3477TC in the language / languages: English, German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info