713982

Rommelsbacher EBC3477TC Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
21
zones glowing intermittently.
Use the following settings
1 ... 3 to keep warm and to reheat
4 ... 6 to steam, slow-cook, boil
7 ... 9 to sear, bake, fry
Deactivating a cooking zone
A cooking zone is deactivated
a) by activating both PLUS and MINUS sensor of the requested cooking zone simultaneously, or
b) by adjusting the requested cooking zone to power level setting „0.“ using the MINUS sensor.
Attention: Touching the ON/OFF sensor [1] will deactivate the entire control (i. e., both cooking zones
always at the same time)!
Dual-circuit setting function
The large cooking zone of this built-in hob features a dual-circuit heating zone enlarging
the upper cooking zone from 140 mm Ø to 210 mm Ø by activating the outer heating
circuit in addition. Activation of the dual-circuit function will not change the preset power
level.
Activating the dual-circuit setting
The dual-circuit function can only be activated provided that the upper cooking zone is in use (power level
> 0). Touch the DUAL-CIRCUIT sensor [2] for its activation. The LED [12] glowing above the sensor will
show you that the outer heating circuit is being activated in addition.
Deactivating the dual-circuit setting
To change back to the small heating circuit only, touch the DUAL-CIRCUIT sensor [2] anew. The LED [12]
above the sensor extinguishing will show you that the outer heating circuit has been deactivated again.
Memorising the dual-circuit setting
When the cooking zone or the control is deactivated while the dual-circuit function is being active, the
control “memorises” this operating state. The next time the cooking zone is turned on, the dual-circuit
function is instantaneously activated.
Automatic cooking function (“A.“)
Each cooking zone comes equipped with an automatic cooking facility.
Its activation provides for a cooking zone to be heating subject to its maximum
power level (100 %) for the duration of a programmed preheat phase. This allows
for contents to be heated particularly fast, and so helps to economise on both
time and energy.
Activating the automatic cooking function
To activate the automatic cooking function for a cooking zone, it needs to be set at its maximum possible
power level ”9.“ (final power level setting). Activating the PLUS sensor once more will activate the
automatic cooking function, with the indication “A.” and the power level appearing alternately on the
display.
At the same time the duration of the preheat phase is dependent on the power level used to continue,
which is to be set afterwards. Once this preheat phase has elapsed, the indication “A.” will disappear, with
the cooking zone automatically switching back to the power level selected.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EBC3477TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3477TC in the language / languages: English, German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info