713982

Rommelsbacher EBC3477TC Manual

20
Zoom out
Zoom in
Previous page
1/28
Next page
20
Cooking with your built-in hob
ON/OFF sensor [1] (main switch)
Use the ON/OFF sensor to activate as well as to deactivate the control of the cooktop.
Activating the control
The Touch Control electronics of the built-in hob is activated by touching the ON/OFF switch [1] and
changes from OFF mode into wait mode. To this end, the ON/OFF sensor must be activated for 1 second.
There will be a short buzzer signal in acknowledgement.
In wait mode both power level setting indicators will permanently show “0.”. This indication might
possibly shift into the background, depending on the cooktop’s status in terms of residual heat and
possible errors.
In addition to the figure, the decimal point in the bottom right-hand corner next to the respective right-
hand cooking zone indicators will be glowing permanently during both wait and active mode.
When a cooking zone is activated within the 10-second wait mode period, the control switches over to
active mode. Provided there is no further input within a period of 10 seconds after switch-on, the control
will automatically switch back to OFF mode, accompanied by an audible signal.
Deactivating the control
Both wait and active mode allow for the control to be deactivated at any time using the ON/OFF sensor.
This deactivation mode always takes priority during operation, regardless of other sensors being activated
simultaneously or the key lock having been activated.
PLUS/MINUS sensors [3]/[4] and [6]/[7]
Use the PLUS/MINUS sensors to switch the cooking zones on and off as
well as to adjust the requested power level setting or running period of
the timer.
Activating a cooking zone (cooking)
In either wait or active mode a cooking zone can be directly activated via the belonging PLUS/MINUS
sensors ([3]/[4] for the large cooking zone, or [6]/[7] for the small cooking zone) unless the cooking zone is
in timekeeping mode (refer to „timer“ section for more details).
Setting the power level
When starting with a PLUS sensor, the power level setting is skipped from “0.” to “4.”. When starting with
a MINUS sensor, the power level setting is skipped from “0.” to “9.”. Further activation of a PLUS sensor
raises the power level setting for the pertaining cooking zone. Analogously, further activation of a MINUS
sensor reduces the power level setting.
Continuous activation of a sensor automatically raises or reduces the power level setting at 0.5-second
intervals. Having reached the maximum power level setting, the power level setting is maintained (final
power level setting) regardless of any continuous activation. This final power level setting is not cancelled
until the respective sensor is briefly released and then re-activated. Such is required for selecting the
automatic cooking function.
Automatic temperature system
Your cooktop comes equipped with an automatic temperature system, i. e., the respective temperature is
kept constant by energy being supplied in cycles. That cycling can be observed by watching the heating
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EBC3477TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EBC3477TC in the language / languages: English, German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info