490003
13
Zoom out
Zoom in
Previous page
1/20
Next page
12
Notes:
-
If the Programme Button [P] is pressed just briefly, the programme number will be
displayed. Re-pressing the button will prevent storage of the current programme.
-
When the Programme Button [P] is pressed for the purpose of storing, a temperature or
time values must be displayed, or else the programme will not be stored!
-
The newly created programme can be started directly after storing. If the programme was
not stored before the programme is started, the values will be reset upon programme
finish.
-
Once the programme was started, the temperature and time values of a programme can
no longer be changed. The programme needs to be finished first by keeping the Start/Stop
Button [
►■
] pressed for 2 seconds.
-
The type of programme as well as the temperature and time values of a programme can be
re-programmed as frequently as you please.
7.5.1 Settings for vacant programmes P 14 P 20
Selection of vacant programme P15 is indicated
Press Setting Button [°C] for changing to set the type of programme
Setting the type of programme
Gentle/Low Temperature Cooking (figure on the left) or
Menu cooking (figure on the right)
Select via [ + ] / [ - ] buttons
Press Setting Button [°C]
Set the start time (time at which to set the programme going)
Current time is suggested (immediate start)
Set via [ + ] / [ - ] buttons
Press Setting Button [°C]
Setting the core temperature
Set via [ + ] / [ - ] buttons
Press Setting Button [°C]
Set the requested temperature for top and bottom heat
(for Gentle/Low Temperature Cooking) or top heat
(for Menu Cooking)
Set via [ + ] / [ - ] buttons
Press Setting Button [°C]
Set the requested temperature for bottom heat
(with Menu Cooking only)
Set via [ + ] / [ - ] buttons
Press Setting Button [°C]
Set the time for bottom heat
(with Menu Cooking only)
Set via [ + ] / [ - ] buttons
Press Setting Button [°C]
Set the time for the rest period (pausing)
(with Menu Cooking only)
Set via [ + ] / [ - ] buttons
Keep Programme Button [P] pressed until storage is acknowledged by a brief audible signal and a blink
of the display.
To verify proper programming proceed as follows:
- Quit the function after the programming procedure by keeping the Start/Stop Button [►■]
pressed for 2 seconds.
- Thereafter, re-select the programme via the Programme Button [P] and verify the set
values by pressing the Setting Button [°C] repeatedly.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher BGO1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher BGO1600 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info