490003
11
Zoom out
Zoom in
Previous page
1/20
Next page
10
7.3.2 Settings for programmes P9-P12 (Menu Cooking)
Function Readout Description
Selected
programme:
P10
Selected programme P10 appears on the display
Press Setting Button [°C] for changing to the options for altering the parameters
Display of type
of programme
Programme type information: Menu Cooking. This cannot
be changed with programmes P1-P12.
Press Setting Button [°C] for changing to set the start time
Setting the start
time
Now you can set the start time (time at which the
programme starts running). Current time is suggested
(immediate start).
Adjust via [ + ] / [ - ] buttons
Press Setting Button [°C] for changing to set the core temperature
Setting the core
temperature
Now you can set the core temperature.
The value stored in the respective programme is suggested
(here: value for P10 = 55°C)
Adjust via [ + ] / [ - ] buttons
Press Setting Button [°C] for changing to set the requested top heat temperature
Setting the
requested top
heat
temperature
Now you can set the requested top heat temperature.
The value stored in the respective programme is suggested
(here: value for P10 = 100°C)
Adjust via [ + ] / [ - ] buttons
Press Setting Button [°C] for changing to set the requested bottom heat temperature
Setting the
requested
bottom heat
temperature
Now you can set the requested top heat temperature.
The value stored in the respective programme is suggested
(here: value for P10 = 200°C)
Adjust via [ + ] / [ - ] buttons
Press Setting Button [°C] for changing to set the bottom heat operating time
Setting the
bottom heat
operating time
(cooking time)
Now you can set the lower heat operating time.
The value stored in the respective programme is suggested
(here: value for P10 = 25 min.).
Adjust via [ + ] / [ - ] buttons
Press Setting Button [°C] for changing to set the rest period
Setting the rest
period
Now you can set the rest period. The value stored in the
respective programme is suggested
(here: value for P10 = 10 min.).
Adjust via [ + ] / [ - ] buttons
Press Start/Stop Button [►■] to start a programme, or press Setting Button [°C] to reset or
recheck the parameters (start time menu appears)
7.4 Digital readout of ongoing procedure
The sequence of digital readouts appearing on the display while an automatic programme is
running varies depending on the respective type of programme.
Automatic Operation is indicated in all readouts by an A appearing in the upper left-hand corner
of the display. The following readouts appear during the programme steps:
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher BGO1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher BGO1600 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info