490003

Rommelsbacher BGO1600 Manual

12
Zoom out
Zoom in
Previous page
1/20
Next page
11
Gentle and Low Temperature Cooking (non-subdivided oven chamber)
Programme start
Start time is indicated if not
in accordance with the
current time
Combined top/ bottom heat
Combined top/bottom heat is active.
Current core temperature of food is
indicated.
Signal and finish
When the preset temperature
is reached, readout is blinking
accompanied by an audible
intermittent signal.
Menu Cooking with oven chamber subdivided by stainless steel plate
Programme
start
Start time is
indicated if not in
accordance with
the current time
Top heat
Top heat is active.
The current core
temperature of the
food is indicated.
Bottom heat
When the preset
core temperature
is reached, oven
switches over to
bottom heat.
Remaining time
for “bottom heat”
programme step is
indicated.
Rest period
When the preset
time for bottom
heat has elapsed,
the rest period will
commence. The
time remaining till
finish is indicated.
Signal and finish
When the preset
rest period has
elapsed, readout is
blinking
accompanied by
an audible
intermittent signal.
When a programme has elapsed, you will hear an intermittent signal for about 1 minute. At the
same time, the appliance will switch off automatically. Programme finish will be indicated as shown
above. The intermittent signal and the display can be acknowledged by pressing any button.
Thereafter, the current time will reappear on the display.
Notes:
-
For starters, we recommend using the pre-programmed programmes P1-P12, as indicated,
to familiarise yourself with the appliance and its extensive range of options.
-
Opt for programmes P1-P12 when creating food variations after your fancy and for new
ideas.
-
Observe the following sections of this instruction manual for how to create and store
programmes of your own.
7.5 Programming a vacant programme (P 14-P 20)
Programmes 14 – 20 are freely selectable, with all values being reset to “0” in as-delivered
condition. Apart from the start time, all values can be stored. The menu of the type of programme
is only indicated during the initial setting cycle. If you wish to alter the type of programme later
on, press the Programme Button [P] and then the Setting Button [°C].
Follow the instructions below to create a vacant programme:
1. Select the programme whose data is to be changed.
Press the Programme Button [P] repeatedly until the desired programme number appears.
2. The temperature and time values to be altered are selected via the Setting Button [°C]
first, then adjusted to the desired value via Plus [+] or Minus [-].
3. Once all programme data is in line with the desired values, make sure to keep the
Programme Button [P] pressed for at least 2 seconds.
Storage of the new programme values will be acknowledged by a brief audible signal and a
“blink” of the display.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher BGO1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher BGO1600 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info