490003

Rommelsbacher BGO1600 Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
14
While the individual temperature and time values are indicated, symbol A (Auto) is glowing.
Apart from that, the readout of the display will be in line with that shown during the setting
procedure.
7.7 Pause function in Automatic Operation
Any activated function can be interrupted by briefly pressing the Start/Stop Button [►■].
This will prompt deactivation of any heating functions and interruption of any operating times
probably effective. The interruption is signalled by the symbol “A” in the upper left-hand corner of
the display blinking. Depending on the respective programme step, the current temperature
around the meat probe and the operating time effectively remaining for the respective programme
step are indicated.
The programme will keep interrupted until the Start/Stop Button [►■] is briefly re-pressed to
resume the function, or the programme function is quit by keeping the Start/Stop Button [►■]
pressed for 2 seconds.
8. Troubleshooting and error display
8.1 Meat probe is missing
If the meat probe is neither required for a function nor connected, the function will be started
nonetheless. The starting process will be accompanied by an audible signal with the “meat probe”
symbol blinking.
The meat probe is required for the following functions:
- Manual function: “combined top/bottom heat with meat probe”
- All automatic programmes
Choosing those functions, the oven will not power up until meat probe is recognised.
Fig.: Readouts indicating missing meat probe in both Manual and Automatic Operation
(“meat probe” symbol is blinking)
Connecting the meat probe will reset the alarm and set the function going.
The audible signal can be reset for 2 minutes by pressing any button once.
8.2 Excessive temperature around meat probe
When the upper sensor detects too excessive a temperature (T>230°) around the meat probe,
you will notice both an audible and a visual signal. In such a case, remove the meat probe.
Caution! Mind the danger of burns upon removal of the meat probe!
As the temperature drops, the audible signal will be reset automatically.
The audible signal can be reset for 2 minutes by pressing any button once.
8.3 Defective sensors to determine the oven temperature
When an improper value is detected by a temperature sensor (T<= 0°C or T>350°C), the
appropriate error code appears on the display (e.g. „Er01“).
In such a case, please approach our customer service by dialling (+49) 9851 / 57 58-32 and give a
description of the fault.
8.4 Overheating protection
The BGO 1600/E additionally features a thermal overheating protection facility, interrupting the
voltage supply inside the appliance when the tolerable temperature limit is exceeded. After the
appliance has cooled down, the voltage supply will be restored automatically.
At this stage, the timer will be in the switch-on mode.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher BGO1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher BGO1600 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info