647722
113
Zoom out
Zoom in
Previous page
1/169
Next page
113
Troubleshooting
Troubleshooting
An “Unknown driver found” dialog box appears, and you are
unable to install the driver
”Find new hardware wizard” does not execute automatically
”Find new hardware wizard” ends before the process is
completed
It may take about 15 seconds (or more) after the USB cable is connected for the XV-2020 to be
detected.
Is the USB cable connected correctly?
Make sure that the XV-2020 and your computer are correctly connected via a USB cable.
Is USB enabled on your computer?
Refer to the operation manual for your computer, and make sure that USB is enabled.
Does your computer meet the USB specifications?
If you are using a computer that does not fulfill the electrical requirements of the USB specifications,
operation may be unstable. In this case, you may be able to solve the problem by connecting a USB hub.
Does “Unknown device” appear for “Other device” or “Universal serial bus controller”?
Use the following procedure to delete “Other device” (Universal Serial Bus Controller) “Unknown
device,” and then restart your computer.
1. In the Windows Control Panel, double-click System. The System Properties dialog box will appear.
2. Click the Device Manager tab. For Windows XP/2000, click the Hardware tab, and then click the
[Device Manager] button.
3. Double-click “Other device” or “Universal Serial Bus Controller” to display a list of devices.
4. From the list, select the unknown device and click [Delete].
5. In the dialog box that asks you to confirm the deletion, click [OK].
6. Verify that “Other device” or “Unknown device” is not displayed in the list, and click [Close] to close
the dialog box.
”Found unknown device” appears even though you installed the
driver
If your computer or USB hub has two or more USB connectors, and you connect the XV-2020 to a USB
connector to which the XV-2020 has never been connected before, the “Unknown device” dialog box may
appear even on a computer onto which you have already installed the driver.
Refer to “Installing & Setup the Driver (Windows) (p. 13)”, and install the driver once again. This is not a
malfunction.
Can’t install/delete/use the driver in Windows XP/2000
Did you log on to Windows as a user with administrative privileges?
In order to install/delete/re-install the driver in Windows XP/2000, you must be logged into Windows as
a user with administrative privileges, such as Administrator. For details, please contact the system
administrator for your computer system.
Did you make “Driver signature settings”?
In order to install/re-install the driver, you must make “Driver Signing.”
(Windows XP -> p. 14, Windows 2000 -> p. 17)
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info