647722
114
Zoom out
Zoom in
Previous page
1/169
Next page
114
Troubleshooting
Windows XP/2000 displays a “Digital signature was not found”
dialog box
Did you make “Driver signature settings”?
In order to install/re-install the driver, you must make the settings described in “Driver Signing.”
(Windows XP -> p. 14, Windows 2000 -> p. 17)
Device Manager shows “?”, “!”, or “USB Composite Device”
The “Insert Disk” dialog box does not appear
Use the following procedure to re-install the driver.
1. Turn off the power of your computer, and start up Windows with all USB cables disconnected (except for
keyboard and mouse).
2. After Windows restarts, use a USB cable to connect the XV-2020 to your computer.
3. Turn on the power of XV-2020.
4. Click the Windows [Start] button, and from the menu that appears, choose Settings | Control Panel.
5. Double-click the System icon. The System Properties dialog box will appear.
6. Click the Device Manager tab.
7. Check whether you can see an indication of “?Composite USB Device,?USB Device,!USB Device,” or
USB composite device” displayed below “Sound, Video, and Game Controllers, Other Devices,
or “Universal Serial Bus Controller.” If you find any such indication, select it and click [Delete].
8. A dialog box will ask you to confirm deletion of the device. Verify the contents of the dialog box, and
then click [OK]. In the same way, delete all indications of “?Composite USB Device,” “?USB Device,”
USB Device,” and “USB composite device” that you find.
9. If you find ROLAND XV-2020 USB Driver with a yellow “!” or a red “?” displayed beside it, delete this in
the same way.
10. When you have finished deleting the unwanted devices, click [OK] in the System Properties dialog box.
11. Turn off the power of the XV-2020, then delete the driver. “Deleting the USB MIDI Driver (p. 23)”.
12. Restart Windows. Then install the driver once again.”Installing & Setup the Driver (Windows) (p. 13).”
Operating system becomes unstable
Operation becomes unstable when the computer is started up with the XV-2020 already
connected
Please start up your computer with the XV-2020 disconnected, and then connect the XV-2020. On a
computer that uses a USB keyboard, starting up the computer with the XV-2020 already connected may
cause operation to become unstable. In this case, start up the computer with the XV-2020 disconnected,
and then connect the XV-2020.
No sound
Have you specified the MIDI data output destination in your operating system?
On your computer, you will need to specify the XV-2020 as the output destination for MIDI data. For
details on how to make this setting, refer to Settings and checking.
(Windows -> p. 21, Macintosh -> p. 26, p. 29)
Have you specified the audio data output destination for your playback software?
Depending on your software, you may need to once again specify the XV-2020 as the MIDI data output
destination. For details on this setting, refer to the operation manual for your application.
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info