647722
115
Zoom out
Zoom in
Previous page
1/169
Next page
115
Troubleshooting
Troubleshooting
Are you running multiple applications?
If multiple applications are running simultaneously, an error message may be displayed. If this occurs,
click [OK] and exit the other applications.
Even if an application window is closed, it is still running if it appears in the taskbar. Be sure to exit
unneeded applications displayed in the taskbar.
Was the driver installed correctly?
In order for you to play back MIDI data via the XV-2020, the driver must be installed. For installation and
settings, refer to “Installing & Setup the Driver (Windows) (p. 13)” “Installing & Setup the Driver
(Macintosh) (p. 24).”
Is your audio playback equipment (e.g., stereo system) connected correctly?
Make sure that the USB connector of your computer is connected to the XV-2020 by a USB cable. Make sure
that the XV-2020’s OUTPUT jacks are connected by audio cables to the input jacks of your audio playback
equipment. For details on connections, refer to “Connecting to MIDI Devices and Audio Equipment (p.
11)”.
Is the power of your audio equipment turned on?
Make sure that the power is turned on for your audio equipment (e.g., stereo) and the XV-2020.
Are the various volume settings of the XV-2020 set appropriately?
Use the Volume knob located on the front panel of the XV-2020 to adjust the volume.
Is your computer in Suspend or Sleep mode?
If so, get your computer to resume normal operation, then exit all applications that are using the XV-2020.
Next, turn the XV-2020’s power off, then switch it on again.
Did you reconnect the USB cable or turn the power of the XV-2020 off and on?
Exit all applications that are using the XV-2020, and turn the power of the XV-2020 off and then on once
again.
Is OMS/FreeMIDI set correctly?
As described in “OMS settings (p. 26)” or “FreeMIDI settings (p. 29)” check the OMS or FreeMIDI settings.
Also make sure that the device for MIDI IN/OUT is correctly selected in the MIDI settings of your MIDI
sequencer software.
Is the OMS setup enabled?
If a diamond-shaped symbol is not displayed at the left edge of the title area in the OMS setup window,
the setup is not enabled. From the OMS File menu, choose “Make Current.”
(“OMS settings (p. 26)”)
Has your computer been set to enter Sleep mode?
If your computer enters Sleep mode, exit the software you are using, and then restart your computer. We
recommend that you set your computer to not use Sleep mode.
Can’t play back MIDI
Has the MIDI device you are using been selected correctly?
Make the settings for the MIDI output device again (p. 26, p. 29).
Are the track outputs set correctly?
MIDI tracks to which no MIDI playback device is assigned will not be heard. If you want to play back a
MIDI track, you must make sure that the MIDI device you want to use is displayed in your software as the
MIDI output port. For details, refer to the owner’s manual for your software.
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info