647722
117
Zoom out
Zoom in
Previous page
1/169
Next page
117
List of Parameters That Can Be
Affected Using the XV-2020
List of Parameters That Can Be
Affected Using the XV-2020
Switching modes
SYSTEM parameter
PATCH parameter
PERFORMANCE parameter
Mode Page Procedure
Patch Play Mode p. 35 Press [VALUE] to make the PATCH indicator lights up.
Performance Part Play Mode p. 38 Press [VALUE] to make the PATCH (RHYTHM) and PERFORM indicators light.
Performance Play Mode p. 38 Press [VALUE] to make the PERFORM indicator lights up.
Rhythm Play Mode p. 35 Press [VALUE] to make the RHYTHM indicator lights up.
GM Play Mode p. 96 Press [VALUE] to make the GM indicator lights up.
Patch Edit Mode p. 44 In Patch Play Mode, while holding down [VOLUME], press [VALUE].
Performance Edit Mode p. 70 In Performance Play Mode and Performance Part Play Mode,
while holding down [VOLUME], press [VALUE].
Rhythm Edit Mode p. 62 In Rhythm Play Mode, while holding down [VOLUME], press [VALUE].
GM Edit Mode p. 96 In GM Play Mode, while holding down [VOLUME], press [VALUE].
Parameter Page Procedure
Master Tune p. 94 While holding down [VOLUME], press [VALUE].
Turn [CATEGORY/BANK] to choose the parameter you want to set. ->
Turn [VALUE] to select the desired setting. ->
Pressing [VALUE] to set values (Write). ->
While holding down [VOLUME], press [VALUE].
* Changes made to the MIDI-USB Thru and USB Descriptor settings are not reflected until
the power is turned off, then on again.
Performance Control Channel p. 94
MIDI-USB thru p. 95
USB Descriptor p. 95
Parameter Page Procedure
LEVEL p. 46 Press [VALUE] to make the PATCH indicator lights up. ->
While holding down [VOLUME], press [VALUE]. ->
Turn [CATEGORY/BANK] to choose the parameter you want to set. ->
Turn [VALUE] to select the desired setting. ->
While holding down [VOLUME], press [VALUE].
PAN p. 46
COARSE TUNE p. 46
FINE TUNE p. 46
OUTPUT ASSIGN p. 46
CUTOFF OFFSET p. 47
RESONANCE OFFSET p. 47
ATTACK TIME OFFSET p. 47
RELEASE TIME OFFSET p. 47
OCTAVE SHIFT p. 46
ANALOG FEEL p. 47
Parameter Page Procedure
PART LEVEL p. 72 Press [VALUE] to make the PERFORM indicator lights up. ->
While holding down [VOLUME], press [VALUE]. ->
Turn [CATEGORY/BANK] to choose the parameter you want to set. ->
Turn [VALUE] to select the desired setting. ->
While holding down [VOLUME], press [VALUE].
PART PAN p. 72
PART COARSE TUNE p. 72
PART FINE TUNE p. 72
PART OUTPUT ASSIGN p. 73
PART VOICE RESERVE p. 73
PART REVERB SEND LEVEL p. 79
PART CHORUS SEND LEVEL p. 73
PART DRY SEND LEVEL p. 73
PART TYPE (PATCH/RHYTHM) p. 72
PERFORMANCE MFX SOURCE p. 80
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info