625586
51
Zoom out
Zoom in
Previous page
1/94
Next page
50 V1112 D 630
Nederlands Français English Deutsch
Thicknesser feed (Fig.7)
The machine is equipped with an frequency variator thus enabling an feeding speed of 5 to 22 m/min.
The feeding motor is started-up by pushing the button of the potentiometer POT, and by turning the
same button a feeding speed can be selected between 5 and 22 meter per minute, changing over from
one speed to an other can be done without having to stop the feeding motor. In case of overloading of
the feeding mechanism the feeding motor must be disengaged immediately by pushing the button of
the potentiometer POT and the main cutterblock motor by pushing the emergency stop button (g. 3,
AU1) on the switch panel. After reducing the depth of cut on the thicknesser, the motor can be started
up again.
Fig.7
Main motor start
Emergency stop
Potentiometer feeding speed
Feeding speed reset
in case of overload
Feeding speed frequency
variator warning light
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland D630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland D630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info