Manual Robland D630 (page 52 of 94) (English, German, Dutch, French)

625586

Zoom out

Zoom in

1/94

D 630 V1112 51

NederlandsFrançaisEnglishDeutsch

Optional thicknesser table rolls (Fig.8)

As an option the machine can be equipped with 1 or 2

rolls in the table. In order to lower the rolls under the table

simply pull the handle and lower, as indicated on the

pictogram.

Maintenance

Attention:

Always disconnect the machine from its power supply before starting all maintenance works!

The interior parts of the machine must be cleaned regulary in order to avoid an accumulation of dust

and woodchips.

Any possible deposit of resin on the various parts of the machine must be taken away with a piece of

cloth and a little solvent (petrol, kerosine or other product)

Never smoke or have any naked ame near the machine when using inammable products, this

to prevent risk of re and serious burns for the operator!

After removing the front, back, and side cover plates, all machine parts which need maintenance are

exposed. The thread bars and posts of the table and the drive chains of both rise and fall of the table

and the feeding mechanism must be cleaned on a monthly base using a thin oil.

The use of a dust extractor system will most certainly extend the life of your machine. The life of the

motors can be extended by blowing out saw dust from the cooling fan and from the motor body itself.

Fig.8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland D630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland D630 Manual

Product: