Manual Robland D630 (page 49 of 94) (English, German, Dutch, French)

625586

Zoom out

Zoom in

1/94

48 V1112 D 630

Nederlands Français English Deutsch

Safety measures on the thicknesser

- - Check iff the planer knifes are well tighened and secured. When this is not the case the knifes by

the centrifugal force will be ejected from the cutter block.

- It is absolutely essential to read this manual before using the machine so you know how to the

machine works and what its limitations are.

- Always make sure that all safety devices are tted to the machine and that the machine is connected

to a dust extraction system.

- Always wear suitable clothing, loose or torn clothes are very dangerous.

- Keep children away from the machine and out of the workshop.

- To avoid damaging your hearing we recommend to wear ear protection, when working with the

machine.

- The height of a planer knife must be 20 mm minimum!

Adjusting the depth of cut

on the thicknesser (Fig.5)

The raise and fall of the thicknesser table is motor driven at 2 speeds up-and down by pushing the

switch S5 for the rise and fall at fast speed, the button S7 for the slow speed rise and fall.

The position of the thicknesser table can be set at 1/10 mm

Position of the table

Fig.5

Table up fast

Table up slow

Table down slow

Table down fast

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland D630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland D630 Manual

Product: