Manual Robland D630 (page 48 of 94) (English, German, Dutch, French)

625586

Zoom out

Zoom in

1/94

D 630 V1112 47

NederlandsFrançaisEnglishDeutsch

Fig.4

Dust extraction

For your own health and to avoid re risk and dust explosion, it is recommended toconnect the

machine to a dust extraction system. The 160 mm outlet on the dust chute need to be connected to a

dust extractor, powerfull enough to obtain an airow of at least 20 m/sec., measured at the outlet on

the machine

Changing and setting

of the planer knives (Fig.4)

In order to turn the planer arbor by hand, push the brake release switch (g.3, S4.1) the warning light

L1 will light. Now the dust-safety hood can be opened by pulling the handle situated at the side of

the hood.

To avoid serious injuries when handling planer knives, the wear of safety gloves is highly

recommended: even blunt knives can cause serious damage to your hands!

Make sure both planer knives and jib strips are well cleaned before putting them into the slots in the

planer arbor.

Take care of the springs underneath the knives, and see to it that they do not stay blocked inside their

seats in the arbor.

Now put the cleaned planer knive into the groove, pushing the knive down with the adjustment

gauge(g.4)), and tighten the bolts. Repeat above for the other planer knives.

Make sure all knives are set at exactly the same height. Before starting up the machine check again

if all bolts are well tightened, and then push the brake release switch (g.3,S4.1) the warning light L1

must dim.

Magnetic knife

setter jigs

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland D630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland D630 Manual

Product: