Manual Robland D630 (page 47 of 94) (English, German, Dutch, French)

625586

Zoom out

Zoom in

1/94

46 V1112 D 630

Nederlands Français English Deutsch

Starting up the machine (Fig.3)

Turn the main switch (Q1) to position “1” in order to put the machine under tension. To start up the

motor push set the ‘Star-Delta’ switch in the ‘Star’ position and push the button S1, after about 8 sec.

turn the switch to the ‘Delta’ position. For the optional ‘Auto-Star-Delta’ push the start button (S1),

the motor starts-up automatically in Star-Delta. By pushing the stop button (AU1) the main motor is

automatically stopped, and slowed down by the automatic brake within 10 seconds.

The feeding motor can be started by pushing the button (POT) of the potentiometer, and by turning the

same button the feeding speed can be chosen from 5 to 22 meters per minute.

To stop the feeding motor, push the same button (POT). All motors are stopped automatically when the

emergency stop button (AU1) is used; Make sure the brake release switch (S4.1 ) is set at position O

and the warning light inside the same button is not lit, in order to be able to start up the machine.

When this same switch is pushed during the run of the machine the motors will automatically be

stopped.

WARNING:

All fuses can be found inside the electrical cabinet, and each time this cabinet is

opened the machine must be disconnected from the main power supply.

Fig.3

Standard manual

‘Star-Delta’

Fig.3

Digital readout Emergency stop

Start main motor S1

Break release S4.1

Table up slow S7

Table up fast S5

Table down fast S5

Table down slow S8

RESET feeding

Warning light speed thicknesser L2

Feeding speed thicknesser POT

Pan switch Q1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland D630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland D630 Manual

Product: